| SPECIFICATION | |
| Model: | G002 |
| Pile height: | 8-12MM |
| Gauge: | 5/32inch |
| Dtex: | 6200 |
| Yarn Type: | monofilament |
| Yarn Material: | PP |
| Stitches rate: | 24 stitches/10 CM |
| Density: | 62400 |
| Backing: | PP |
Description:
decorative artificitial grass model G002 , bi colors with CE certification , monofilament
grass yarn type and yarn material is PE The backing material is PP+None woven . The pile height , density , backing and Dtex are all as customer order.
Description: Many different kinds backing , PP,PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.
Description: High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.
have CE certification, ISO9001, ISO14000, SGS and VOA.
Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.
Loading Quantity
| |
20 GP |
about 2200-2500 sqm |
40 GP | about 4500-4600sqm |
40 HQ | about 4600-5000sqm |
Installing Decoractive Artificial Grass onto Concrete or Permanent Base
1. First of all assess how much futsal court interlock floor
you will need. Note: We manufacture rolls in 2 widths: 2 metres
(6 feet 6 inches) or 4 metres (13 feet 1 inch) .
2. Make sure that the surface to be covered is clean and smooth ready to receive the futsal court interlockfloor .A self levelling compound available from any DIY store can remove surface imperfections that may
show through to the top surface especially on thinner pile height products.
3. Lay the futsal court interlock floor
to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 2 to
3 hours to settle. This helps stop any wrinkling or creasing.
4. Cut and trim your futsal court interlock floor , using a sharp Stanley knife making sure are no gaps between walls
and plastic grass mat .
5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used.
6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill will eventually compact so you should consider adding a final layer when settled.
7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and futsal court interlock floor can be used.