Product Details

Packaging & Shipping

Packaging Detail:	4*25m/roll about 3000 sqms/20 container about 7000sqms/40 container
Delivery Detail:	about 7-10 days

SPECIFICATION
Model:	G009
Pile height:	30-60MM
Gauge:	3/4inch
Dtex:	12500
Yarn Type:	monofilament
Yarn Material:	PE
Stitches rate:	20 stitches/10 CM
Density:	10600
Backing:	PP + none woven cloth

Description:

Artificial grass model G009 , greencolor with CE certification , monofilament grass yarn

type and yarn material is PE . The backing material is PP+None woven. The pile height , density , backing and Dtex are all as customer order.

Description: Many different kinds backing, PP,PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.

Description: High duribility and elastisity, clean court make you love in playing football very much. This model is suitable to 5 people side, 7 people side,11 people side football field and also mini-football field.

Description: From now on, we have CE certification,ISO9001,ISO14000, SGS and VOA.

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.

Loading Quantity

20 GP

about 3600-4000 sqm

40 GP

about 7000-8000 sqm

40 HQ

about 9000-10000sqm

Installing Artificial Grass onto Concrete or Permanent Base

1. First of all assess how much Artificial grass for shooting range you will need. Note: We manufacture rolls in 2 widths: 2 metres

(6 feet 6 inches) or 4 metres (13 feet 1 inch) .

2. Make sure that the surface to be covered is clean and smooth ready to receive the Artificial grass forshootingrange .A self levelling compound available from any DIY store can remove surface imperfections that may

show through to the top surface especially on thinner pile height products.

3. Lay Artificial grass for shooting range to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 2 to

3 hours to settle. This helps stop any wrinkling or creasing.

4. Cut and trim your Artificial grass for shooting range using a sharp Stanley knife making sure are no gaps between walls

and Artificial grass for shooting range .

5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue

should be used.

6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking

care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill

will eventually compact so you should consider adding a final layer when settled.

7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive

and Artificial grass for shooting range can be used.