Product Details

2016 The latest technology China Concrete water reducer with high quality and best price

Product Description

I. Introduction

This product is a non- air-entraining type efficient concrete water reducer with β-naphthalene sulfonate-formaldehyde polycondensate as a main component, features no delayed coagulation and good compactibility, can reduce water cement ratio and greatly improve the early and long-term strength of concrete and can be used to prepare high-flow, high-strength, high anti-permeable and high-performance concrete and premixed concrete. This product is in line with the standards of GB8076-2008 and GB18588-2001.

Ⅱ. Product performance

1. The product has a significantly water dispersion reducing effect with the water-reducing rate reaching 18-28% and can improve the liquidity of the cement neat paste and concrete mixture in the case of low water-cement ratio.

2. In the case of maintaining the same water-cement ratio, it can greatly improve the workability of concrete, improve the liquidity as well as bleeding separation, improve the bond stress of reinforced concrete and make the concrete surface smooth.

3. Under the same condition of maintaining the original strength, when the powder and cement content ratio is 0.5 to 1.2%, it can save cement by about 15% to 25%.

4. The product has a significant early strength and enhancement effect. When the powder and cement content ratio is 0.5 to 1.2%, concrete strength improves by 50% to 120% in one day; 40% to 10% in three days, 30% to 80% in seven days, 25% to 75% in 28 days and increases continuously later under the condition of same cement dosage and slump.

5. The product features no delayed coagulation, no gas bleeding as well as wide adaptability to cement, can improve the concrete’s physical and mechanical properties, reduce cement hydration, improve concrete anti-penetrability performance obviously and has no effect to concrete shrinkage.

6. This product can be used to prepare high-strength concrete with a slump of 5 cm to 7 cm and C60 high strength concrete with a slump of 18 cm to 20 cm.

7. Can also prepare highly durable concrete and anti-permeable concrete, can be compounded with micro-foam agents, can prepare highly freeze thawing-resistant concrete (concrete anti-freeze thawing for over 300 times) and can also prepare highly carbonization-resistant concrete, etc.

Ⅲ.COA

CERTIFICATE OF ANALYSIS

Issue date:	May 21, 2015	Lot No.:	20150521X
Grade:	FDN	Dosage:	2.0%
Testing Item	Specification	Result	Testing Standard
Water reducing rate:	≥ 14%	21%	GB8076-2008
Bleeding rate :	≤ 90%	67%	GB8076
Gas content :	≤ 3%	2.6%	GB/T50080-2002
Concreting time (min)	Initial set: -90~+120	+20	GB8076
Concreting time (min)	Final set: -90~+120	+5	GB8076
Compressive strength rate	1^st day : ≥ 140%	154%	GB/T50081-2002
	3^rd day : ≥ 130%	146%
	7^th day: ≥ 125%	136%
	28^th day : ≥ 120%	130%
Shrinkage rate:	28^th day: ≤ 135%	105%	GB/T50082-2009
Conclusion:	The product is qualified according to GB8076-2008 standard.

Packaging & Shipping

Packing in woven bag lined with two-layer polyethylene plastic or kraft bag glued with plastic. Net weight is 25kg each bag.

Solutions are no more corrosive than water and recommended materials of construction include stainless steel, fiber glass, plastic, and glass or expoxy-lined vessels. Do not use iron, copper or aluminum. Spilled polymer is very slippery and should be collected prior to flushing with water. The shelf life of these products is 24 months when stored in unopened package in a dry atmosphere at temperature no higher than 40°C.

Our Services

We can offer 1-2kg free samples to you.

We have many seasoned technicists and they can solve any problems you have.

Company Information

Shandong JuXin Chemical Co., Ltd. was established in 1993 with a registered capital of RMB 10 million . factory area of 20,000 square meters, since the construction the factory has been the strong support of community leaders and help. 260 employees, five of whom have senior titles, intermediate title 13 people. Enterprises always carry forward the "unity and pragmatic, pioneering spirit, hard work, self-reliance" spirit of enterprise, increasing scientific and technological input, the introduction of high-tech talent, the purchase of modern equipment, has laid a solid foundation for the development of enterprises. Strict management, strict process and strong technical force, to ensure that the inherent quality and high-tech products with high quality and credibility to advance the national market.

Now the main production of the four series of products: ONE polyacrylamide series Anionic, Nonionic, Cationic polyacrylamide polymer, the annual production capacity of 5000 tons; TWOwater quality stabilizer series of annual production capacity of 3000 tons;THREE oil additives series hydrochloric acid , calcium chloride, hydrofluoric acid, fluoroboric acid, engine antifreeze and other basic chemicals, oil field drilling mud additives, cementing additives, oil and other chemicals, oil additives series, the annual production capacity will reach 10,000 tons of concrete FOUR plus agent series production of 8,000 tons, FDN superplasticizer reputation in and outside the province.

Products are sold to Dongying Shengli Oilfield, Henan Zhongyuan oilfield, the Daqing Oilfield, the Turpan-Hami Oilfield, Huabei Oilfield, the Dagang Oilfield, Jidong Oilfield, Handan, the product was well received. Over the years JuXin products with good reputation and excellent quality sold outside the province and the country's major oil fields, favored by the users, The factory t in 2002 through the ISO9001: 2000 quality management system certification. 2009 through GB / T19001-2008 quality management system certification.

Bi Lei, general manager with the staff sincerely welcome friends to visit and guidance.