Welded Gabion is made of welded wire mesh panels assembled with spirals, locking pins and stiffener. Each gabion panel is composed of rugged high tensile wire coated by a thick, corrosion-resistant layer of zinc.

The wire is also available with a tough, durable pvc coating. Welded gabion could be used for prefilled on site construction which is quick and easy. They have a variety of applications such as retaining walls for commercial, industrial and road project, landscaping, erosion control.

 

Material	Low Carbon Steel Wire / Galvanized Steel Wire
Surface Treatment	Zinc Coated Welded Gabion
	PVC Coated Welded Gabion
	Galfan Coated Welded Gabion
ASTM Standard	ASTM A 856
	ASTM A 641

  

Welded Gabion
Wire Diameter	2.7-5.0mm
Mesh Opening	50 x 50mm	75 x 75mm	100 x 100mm	50*120mm
Dimension	1m x 1m x 1m	2m x 1m x 1m	3m x 1m x 1m	3m x 1m x 1m

 Advantage:

• Easy to install

• High zinc coating thus anti-rust and anit-corrosive

• Low cost

• High security

• Colorful stones and shells etc can be used with gabion mesh to make beautiful appearance

• Can be made into various shapes for decoration

How to install welded Welded Gabion?

• Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.

• Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.

• Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.

• Step 4. Welded gabion box filled with graded stone by hand or with a shovel.

• Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.

• Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the up

•