Stainless Steel Hydraulic Lighting Bollard for Security, Parking, Safety Roadway
USD $1,800 - $2,100 /Set
Min.Order:1 Set
Dongguan V Finder Electronic Technology Co., Ltd.
Stainless Steel Hydraulic Lighting Bollard for Security, Parking, Safety Roadway
The automatic Bollard is an electric-hydraulic mechanically operated retractable bollard system.
The system can be quickly and easily operated. It is suitable for both security and accesscontrol
applications.
The system is designed to bring desired environmental and aesthetic enhancements to perimeter
security,securing perimeter access without providing a sense of social disorder and active alarm measures
All in one Hydraulic rising bollard introduce
Install micro hydraulic pressure into raising bollard . Every bollard is a independent unit . Compare central hydraulic system drive.It have those advantages :
1,No need lay underground hydraulic pipeline. Easy installation. Low construction cost
2,Because of Have no hydraulic pipeline. It only need inspect independent bollard during maintenance.it is easy to take out the control box from earth .Easy repair and maintenance
System takes of micro motor and a integration ports connect gear pump and oil box . Then use a all in one hydraulic cylinder to built a complete micro hydraulic .use structure parts to install this system into roadblock inner.In this way complete electronic energy >mechanical energy>hydraulic energy conversation process .totally reach micro .electronic.;liquidize integration
Product features :
(1) Emergency release ;
(2) There is no limited on distance between Independent bollard and control system
(3)Can make sure more than one bollard synchronous raise and fall
(4)Can takes of short/remote control and short swing card or long range radio swing card control .
(5)Can connect with PC reach sequencing control.Suitable for high frequency high safety requirement place
Basic bollard parameter :
Power supply : 220V
Output power 0.22KW
Gross weight 150KG
Board materials SUS304 material
Board thickness 6mm
Anti Impact standard 15K Joule
Bollard diameter : 218mm
Bollard surface process : Polishing, Brushing,
Waterproof standard IP67
Raised height 500-600mm( Optional)
Lift force :500KG
Movement manner : Motor drive
Movement limit : Magnet induction limit .PC time control
Alarm method :30mm Two ways reflective tape ( Optional LED )
Lift time : 4-6 seconds
Board control : Line control /remote control or connect with other equipment
Control distance : Short route remote control 30-50m
Color : Silver
Running voice : Optional
Diameter mm | Height mm | Thickness mm | Materials | superficial craft | warranty | mechanical structure |
| |
220 | 600 | 6 | 304 | 240 wire drawing | 1 year | full Life | ||
Voltage: | 24V/220V/380V | Protection: | IP67 | Emergency : | Back up EPS Power | |||
Power: | 245W | Up time : | 2s/4S | Adjustment : | Height .concentric can adjustemnt | |||
Motor : | AC/DC | Down time : | 2s | Speed: | 150-300mm/s | |||
Deive method : | Electronic and hydraulic integration | Frequency : | 70% | Load ability : | More than 350KG | |||
work temperature : | -35~70 | Spacing : |
| Out off power rising : | × |
width mm | Height mm | Thickness mm | Plate thickness mm | surface craft | warranty |
500 | 600 | 250 | 2mm | Spary paint | 1 year |
One control box have no limited control bollard | |||||
Contrl system includes .Remte control. Button. Full control wire. interlocksystem. Ground sensor connector . Infrared sensor connector |