Creative Multi-functional Hand Crank Ignition Light
USD $15 - $20 /Piece
Min.Order:2000 Pieces
Shenzhen HiGo Outdoor Sports Goods Co., Ltd.
Creative Multi-functional Hand Crank Ignition Light
Specifications
1. The dynamo crank igniter adopts the principle of cranking for power generation to charge its built-in battery. It also charges digital devices (e.g. mobile phones) via connection cable. Multifunction flashlight includes compass, whistle and rainproof, etc.
2.Cranking for power, no batteries are required; energy saving, environmental friendly, economical, and safety (the common battery will leak easily
Simple outline and delicate appearance,low noise but high efficiency; long working time.
3.Ultra bright LED are guaranteed to brighten your way, also with compass and whistle functions.
4. It can ignite at any condition, allowing you to meet those extreme outdoor tests such as lighting platycodon and rice stalks.
Main Technical Parameters:
1) Electric Performance Parameters
ITEM | PARAMETER | UNIT |
Max. Luminous flux | ≥6 | Lm |
Lighting time after cranking for 1 minute | ≥20 | Minute |
Ignition times after being charged fully | 10 | Time |
Lighting time after being charged fully | ≥3 | Hour |
Fully charged time via5±0.2V external power source | 3.5-5.5 | Hour |
Mobile phone’s talking time after 3 minutes charging | ≥3.5 | Minute |
2) Parameters Of External Power Source
Specification of charging plugs | DC plug Φ3.5×Φ1.1 |
Input voltage | 5V |
3) Main Parts Life-span
LED light | ≥50000 Hours |
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
4) Others
Specification of built-in battery | Lithium battery, 160mAh, 3.7V |
Motor | Brushless 300 |
Operation Method:
1.Cranking For Power:
Unlock the handle, crank it at the speed of 2.5-3 cycles per second.
2. Lighting:
Press the switch to light on, then press again to turn it off.
3. External Power Source:
Connect with the 5V adapter to charge the internal battery, and it will be fully charged after about 3.5-5.5 hours.
4. Charge For Digital Devices:
Connect this product with digital devices via connection cable, unlock the handle, and crank it at the speed of 2.5 to 3 cycles per second.
5. Ignitor:
Press the ignite switch until ignitor turns on, then loosen to off. (When hold the switch for more than 10 seconds, it will automatically shut down. After the closure for 3 seconds protected, you can turn it on again.)
6. Compass:
You'll have to hold it quite flat, so that the compass needle can work.
7. Whistle:
Unlock the handle, the whistle is best used when turning to 60 degree angle.
Cautions:
Pay attention to the holding gesture when cranking, so as not to hurt your fingers.
1. In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please charge it immediately.
b) Please crank it at least 1 minute once a month.
c) Do not crank it for more than 5 minutes when the power of the battery is enough. Do not crank it more than 15 minutes when it runs out of power.
d) Do not crank it for a long time or too violently.
1.Do not place this product in where temperature or humidity is high. Don’t drop or hit this product.
2.The product will be a little heated when cranking for a long time.
3.Stay away from people's ear when whistle.
4.Our company reserves the right of final interpretation of the product.
Product Accessories:
User manual, Connection cable