Specifications

carbon fiber
size:1.52x30m
Heat resistant:-50C to 200C
No glue leave after remove
High Strech rate

carbon fiber

Product specification:

Model	CM002
Product	3D carbon fiber film with air drain
Thickness	0.15-0.16mm
Heat resistance	-50°C to +200°C
Stretch rate	33+ pascal
Mask thickness before embossing	11.5c
Glue material	Imported removable glue
Glue thickness	0.03mm
Glue weight	30g/m2±2gm2
Gram weight of release paper	140gsm embossing paper
Thickness of release paper	0.15-0.16mm
Stand up against	water, dirt, grease, salt, weak acids oil
Durability period	indoor 7-8 years, outdoor 5-6 years
Compatibility	Die cutting,car decoratioin,architectural decoratioin
Colors available	Black, white, red, green, blue, orange, grey, pink, yellow,glod,sliver
Durability period	Indoor 7-8 years; outdoor: 5-6 years

 

 

1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion

    and clean any contaminants that may cause imperfections.

 

2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove

   wrinkles

 

3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles 4, you could buy the best

   heat gun and car wrap squeegee in our company

 

Kind Reminds  

1.No pasting in rainy or cloudy weather.

 

2.No waxing one week before the pasting of the car sticker.

 

3.No washing in 48hrs after the pasting.If there is crimp or crease or if the temperature is low,

   better blow it with a hair drier first from a certain distance and then to paste.