Nylon Sheet/Rod
USD $5 - $10 /Kilogram
Min.Order:100 Kilograms
Zhenjiang New Hengtong Conveying Equipment Co., Ltd.
Features:
1. Natural & balck standard grade of monomer cast Nylon offers an excellent combination of mechanical strength, stiffness and electrical insulation and wear properties, these properties make our standard grade of nylon the perfect choice for use as gears, rollers, star wheels scrolls and many mechanical applications where the use of metal is not possible.
2. Green & yellow oil filled nylon 6
Green & yellow oil filled cast nylon is an internally lubricated of nylon that is commonly used in applications where applied lubricants cannot be used, oil filled nylons have a lower coeffciend of friction over standard grades of nylon and also offer improved wear resistance.
Applications:
Frition bearing, bushings, gears, valve seats, couplings, rollers, cams, clamps, pump components, snap connectors.
Item | Units | Value |
Density | g/cm3 | 1.15-1.16 |
Water absorption | % | <0.6 |
Frictional coefficient | <0.45 | |
Wear loss | Mg | <4.5 |
Compressive strength | Mpa | 127 |
Rockwell hardness | RHM | 112 |
Tensile strength | Mpa | 79 |
Flexural strength | Mpa | 130-150 |
IZOD impact strength | KJ/m | >14 |
Elongation at | % | 60 |
Shear strength | Mpa | 80-95 |
Bending elastic modulus | Gpa | 26.4-31 |
Heat deformation temperature(0.46MPA) | °c | 120 |
Breakdown voltage | KV/mm | 18.6 |
Sizes:
Nylon sheet: 2000*2000*8-300mm
1300*2600*8-300mm
4000*600*8-300mm
Nylon rod/tube: Φ10-2000mm
Φ 40-2000mm