Product Details

Four Layer Sliding Car Parking System

Four Layer Sliding Parking System
Operating Principle:
This is multi-column design equipment. The ground level can only slide right or left, the top level can only lift and the middle levels can both slide and lift. Except the top level, there's an empty space on each level that can slide right or left. Cars parked/unparked by the lifting of car pallets on top level, the sliding of car pallets on ground level and the lift and sliding of car pallets on middle levels. Parking space on ground level can park/unpark car directly. When parking/unparking car on middle level, the car pallets that underneath the parked/unparked car all slide right or left to leave an empty space and make the empty space just underneath the parked/unparked car. So the car pallet can reach to ground level, then the car can be parked or unparked. The park/unpark process can be seen in below diagram.



















The car in red color is to be unparked. The equipment need to finish follow actions to unpark the car. 1. The middle car pallets that underneath the red car all slide one space to left. 2. The car pallet that load the red car shift down to the ground. 3. The red car finish unparked. Note: The parking process is the same as the unparking process. The middle car pallets that underneath the vacant pallet on top level all slide one space to left, then the vacant pallet shift down to the ground. The pallet lift to top level when the car drive on steady and then finish car parking.










Features
1. The system structure is very flexible and can be arranged according to your site condition and requirements. 2. About awning design, can be designed according to your requirements, such as full awning type , part awning type and simple awning type and no awning type. 3. Save land area and take full use of space, the parking quantity is about 5 times compared with normal plane parking lot. 4. Low equipment cost and maintenance cost. 5. Lift smoothly and with low noise, convenient for car goes in or out. 6. Comprehensive security protection system, such as safety anti-falling hook, mechanism detect people or car entering, car parking limit mechanism, interlock mechanism, emergency brake mechanism. 7. Adopt PLC automatic control system, use button, IC card and remote control system, make operation very easy.







Applicable Occasion
This is an above ground type parking system, it’s suitable for residential area, commercial center, office buildings, stations, hospitals etc.
Specifications



















Suitale Parking Cars	Model	Small Car	Mid-Size Car	Large Car	Over Size Car
	Car Size	LengthWidthHeight	LengthWidthHeight	LengthWidthHeight	LengthWidthHeight
	(mm)	≤4400×1750×1450	≤4700×1800×1450	≤5000×1850×1550	≤5300×1900×1550
	Car Weight	≤1300Kg	≤1500Kg	≤1700Kg	≤2350Kg
Requirement Space	h(mm)	1700	1700	1700	1700
	p(Level)	4~6	4~6	4~6	4~6
	a(mm)	5300	5600	5900	6200
	b(mm)	2700	3000	3300	3500
	c(mm)	700	700	700	700
	N(mm)	2400	2400	2400	2450
	H(mm)	h*p+3600	h*p+3600	h*p+3750	h*p+3750
Motor Power	Lift Motor	2.2Kw,3.7Kw	2.2Kw,3.7Kw	2.2Kw,3.7Kw	2.2Kw,3.7Kw
	Sliding Motor	0.2Kw	0.2Kw	0.2Kw	0.2Kw
Rated Speed	Lift Speed	4.8,7.0m/min	4.8,7.0m/min	4.8,7.0m/min	4.8,7.0m/min
	Sliding Speed	6.4,9.5m/min	6.4,9.5m/min	6.4,9.5m/min	6.4,9.5m/min
Drive Mode		Motor and Steel Rope	Motor and Steel Rope	Motor and Steel Rope	Motor and Steel Rope
Power		3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ	3 Phase 5 Wire 380V 50HZ
Control Mode		Button,IC Card and Remote Control System	Button,IC Card and Remote Control System	Button,IC Card and Remote Control System	Button,IC Card and Remote Control System
Surface Treatment		Galvanized and Painting	Galvanized and Painting	Galvanized and Painting	Galvanized and Painting

Packaging & Shipping

Packaging:our normal package way in carton/wooden box/steel frame pallet or according to the customers' request.

Shipping: accordance with specific needs.Sea shipping,air freight or express.

Delivery time:within 30 working days on confirming the deposit.

Our Services

1.Sample order :

We accept sample order for our bike rack.However,if you order more, you will get better discount.

2. OEM / ODM service:

OEM and ODM is available. We are a professional manufacturing for bike rack / bike stand with 15 years experience .We can make the bike rack as your requirements and print your logo on the bike rack.

3. After-sales service:

Our warranty is 12 months. If you find the bike rack have some quality trouble when you got the packages , please take some photos and email us. After our confirming,we will send the replacement to you.

Other products