Decorative Stainless Steel Sheet

 Features of Decorative Stainless Steel Sheet:

• Accurate dimension
• Minimum maintenance
• Excellent service life
• Non Corrosive
• Heat Resistant

Specifications of Decorative Stainless SteelSheet:

1) Thickness scale: 0.4 - 3.0 mm

2) Normal Width:

    a) 1,000mm

    b) 1,219mm

    c) Customized, but not more than 1,219mm

3) Length scale: 100 - 5,000mm

4) Cut precision: length, width ±0.5mm

5) Cater-corner error: <0.5mm

6) Product materials: SUS304, SUS316, SUS430, SUS439, etc.

7)Common specification: 1000mm*2000mm   1219mm*2438mm  

Available Surface of Decorative Stainless Steel Sheet:                                

1) No.4 Finish

2) HL Finish

3) No.8 Finish/Mirror Finish                           

4) Vibration Finish                              

5) Titanium Gold HL Finished                               

6) Titanium Gold No.8 Finished                                

7) Embossed Finish                               

8) Etched Finish                               

9) Beads Blast Finish                                

10) Anti-Finger print Finish                               

11) Special Finish (Nest Finish Vibration & Circle Finish etc)  

Packing Information of Decorative Stainless Steel Sheet:

Please don’t worry that our products are packed, stored, transported according to the international regulation. We do care about the quality of our products; even some little details are paid attention to.
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement.
Plus, our storage racks are made of wood. Other kinds of metals are settled in other places, far from the stainless steel. Any unwanted chemical reaction can be prevented.

Export Markets
Our target market is the international market. Every year we export most of products to countries like India, Pakistan, South Korea, Brazil, Australia, South Africa, Spain, Sri Lanka, Taiwan, Hong Kong, etc.

Applications of Decorative Stainless Steel Sheet: 

1. Building applications

    a) Column covers

    b) Elevator doors

    c) Escalators and moving walk cladding

    d) Ornamental and decorative cladding

    e) Hotel entrances

    f) Architectural trims and accents

    g) Telephone booth

    h) More

2. Home fixture applications:

    a) Kitchen appliances

    b) Cabinets

    c) Doors

    d) Mail boxes

    e) More

3. Industrial fixtures applications:

    a) Medical instruments

    b) Electrical products

    c) Refrigerator

    d) Hardware

    e) More

Manufacturing Process of Stainless Steel Sheet:

Stainless steel sheet manufacturing is a process industry in which S.S. flats is prime raw material of different quality and rates. They are sending to Hot rolling units for hot rolling of different sizes and for proper 16 gauge material.

→16SWG hot rolled material is annealing in cold rolled annealing furnace and after pickling in different acids it is send Roughing Mill. Roughing mill dose the process of gauge reduction to about 20 gauge after passing through it no of times. Annealing is done on a 70 feet long gas fired furnace with ceramic roll and 11 burners. Thus giving even heat and increase the surface finish of sheets.

→All mill rolls are grinded on precision grinding machine with proper chamfering after first shift operation

→There 20 gauge roughed sheets are again annealing and pickled in respective acids and send to mill no 2 for finish rolling.

→All sheets are pickled in different tanks. And also sheet dried on brush roll machine before dispatch. This surface finish is maintained.

 →These sheets are again annealing then sent to straighten machine for straightening and pickling in acid and send for packing according to size and quality.

Thus required 22 gauge final sheets obtain.

Similarly if 26 gauge sheets are required, one/two more finish process is repeated and then packed.

→Spend acid is collected in collection tank and primary treatment is done on it in pollution plant.

Rough edges of sheets are cut before packing.

→Inspection is done at various stages. By experience staff keeping proper control overall internal process via rolling, annealing, pickling, treatment of waste etc.

All mill rolls are grinded on precision grinding machine with proper chambering after 1 shift operation.

Technical notes:

Chemical Composition:

SMC's promise: 

As the world leading manufacturer and supplier, Shanghai Metal Corporation makes“Service,Management,Craftsmanship."  In our commitment to deliver world class service, SMC's Quality Control Department not only promise to provide the best quality products, excellent customer services,  fast and reliable deliveries, and reasonable prices; but also goes the extra step to provide environment conscious products that will improve lives.

Our Products: