Product Details

Specificationas of Tinplate:

1) Capacity: about 5,000 tons per month for coil and sheet products.

2) Standard: Passiviation 300 & 311, EN10202, EN10203, JIS G3303, ASTM A624, ASTM626.

3) Raw material: CR, SPCC, MR

4) Thickness: from 0.15mm to 0.40mm, all available

5) Width: 200mm -1050mm, all available

6) Hardnss:T2-T5, DR8-DR10

7) Tin coating weight: 1.1g/m2-8.4g/m2

8) Surface: bright finish, stone, super stone, matte, silver

9) Min trial order: 5 tons per each thickness, 1x20' per delivery

Thickness	Width	Length	Tin Coating Weight
0.15mm-0.4mm	200mm-1050mm	As you request	1.1g/m2-8.4g/m2

Available Size of Tinplate:

	T1-T5		DR8-DR10
	Available Size Range	Size Range for Normal Production	Available Size Range	Size Range for Normal Production
Thickness (mm)	0.15-0.60	0.18-0.50	0.13-0.60	DR8 0.15-0.25 DR9 0.15-0.25
Thickness (mm)	0.15-0.60	0.18-0.50	0.13-0.60	DR10 0.20-0.36
Width (mm)	457-1067	650-950	457-1067	690-950
Length (mm)	406-1110	500-1050	406-1110	500-1050

Surface Finish:

Finish	Surface Roughness Aim Ra (*)	Features & Applications
Bright	0.25	Bright finish for general use.
Stone	0.40	Surface finish with stone marks that make scratches less conspicuous.
Super Stone	0.60	Surface finish with heavy stone marks.
Matte	1.00	Dull finish mainly used for making crown and DI cans (unmelted finish for tinplate)
Sliver (Stain)	/	Rough dull finish mainly used for making artistic cans (tinplate only, melted finish)

Steel Types

Type	Description
MR	Base steel low in residual elements that has excellent corrosion resistance. It widely used in general applications.
L	Base steel extremely low in residual elements such as Cu, Ni, Co, and Mo that has excellent corrosion resistance to certain types of food Products.
D	Aluminum-killed base steel used in applications involving deep drawing or other types of severe forming that tend to give rise to Lueder's lines.

Temper Grade

	Temper Grade	Hardness Guarantee (HR30T)	Applications
Single Reduced	T-1	49±3	Cans, nozzles, and other applications involving deep drawing that requires large flexibility
	T-2	53±3	Items that require moderate drawability and some stiffness.
	T-2.5	55±3	Items that require the drawability of T-2 in combination with the stiffness of T-3 for general uses.
	T-3	57±3	Proper stiffness is imparted to prevent buckling. For general uses.
	T-4	61±3	Can bodies, end and crowns that require comparatively large stiffness.
	T-5	65±3	Can bodies, ends and other applications that require excellent buckling resistance.
Double Reduced	DR-8	73±3	Bodies of carbonated beverage cans and beer cans that require stiffness and strength.
	DR-9	76±3	Ends of carbonated beverage cans and beer cans that require stiffness and strength.
	DR-9M	77±3	The same as DR-9.
	DR-10	80±3	Special application that require strength.

Applications of Tin Plate Sheet:

Cans and Containers: cans for foods and beverages, containers for oils, grease, paints, polishes, chemicals, aerosol and many other products.
Electronics: electrodes, cable tape, magnetic screen covers, etc.
Engineering: automotive oil filters, automotive air filters, gaskets, etc.
Constructions: Gas meter internal components, heat exchangers, cookware, shelving, etc.

Process of Tinplate:

Steelmaking-Hot Rolling-Cold Rolling-Annealing-Temper Rolling-Electrolytic Plating.

Our Tinplate Products:

Our Tinplate Packing:

SMC's promise:

As the word leading manufacturer and supplier, Shanghai Metal Corporation makes“Service. Management. Craftsmanship." In our commitment to deliver world class service, SMC's Quality Control Department not only promise to provide the best quality products, excellent customer services, fast and reliable deliveries, and reasonable prices; but also goes the extra step to provide environment conscious products that will improve lives.