Micro-duct reducing connector
Micro-duct reducing connectors make splicing MicroDuct fast and easy. Simply push the MicroDucts into the center of the Micro-duct reducing connector. No tools are required. The reducers can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.
Micro-duct reducing connectors operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).
Micro-duct reducing connector Feature:
Body Material: | PC, impact resistant |
Collect Material: | POM, stainless steel teeth |
O-rings Material: | Nitrile rubber |
Blowing Pressure: | 16 bar |
Burst Pressure: | 25 bar |
Temperature Range: | -10 ~ 60°C |
Insertion force: | 50N max (5kg) |
Micro-duct reducing connector Specification:
Reepure code | Description |
MRC-5/3.5-3/2.1 | 5-3mm straight connector, bore 2.1mm |
MRC-7/5.5-3/2.1 | 7-3mm straight connector, bore 2.1mm |
MRC-7/5.5-5/3.5 | 7-5mm straight connector, bore 3.5mm |
MRC-8/6-3/2.1 | 8-3mm straight connector, bore 2.1mm |
MRC-8/6-5/3.5 | 8-5mm straight connector, bore 3.5mm |
MRC-10/8-7/5.5 | 10-7mm straight connector, bore 5.5mm |
MRC-10/8-8/6 | 10-8mm straight connector, bore 6mm |
MRC-12/10-7/5.5 | 12-7mm straight connector, bore 5.5mm |
MRC-12/10-8/6 | 12-8mm straight connector, bore 6mm |
MRC-12/10-10/8 | 12-10mm straight connector, bore 8mm |
MRC-12.7/10-10/8 | 12.7-10mm straight connector, bore 8mm |
MRC-14/12-10/8 | 14-10mm straight connector, bore 8mm |
MRC-14/12-12/10 | 14-12mm straight connector, bore 10mm |
MRC-16/12-12/10 | 16-12mm straight connector, bore 10mm |
MRC-16/12-14/10 | 16-1414mm straight connector, bore 10mm |
MRC-18/14-14/10 | 18-14mm straight connector, bore 10mm |
