Specifications

Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB

Advantages


Small volume with light weight, it is convenient for taking. Its outline dimensions are

212mm×80mm×32mm.

Large screen(128×64 dot matrix LCD), showing all functions and parameters.

Test at any angle, even upside down.

Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.

Seven impact devices are available for special application. Automatically identify the type of impact devices.

Large capacity memory could store 500 groups (Relative to average times32∼1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.

Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.

Battery information indicates the rest capacity of the battery and the charge status.

User calibration function.

USB port with the PC humanity multi-functions data proceeding software.

Original imported high speed thermal printer support the immediate printing function. It can save data permanently.

NI-MH rechargeable battery as the power source. With rechargeable battery, charging for three hours, it can use for two months. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).

Auto power off to save energy.

Excellent after-sale service system for high quality products---two years guarantee and all life maintenance. Easy to buy and comfortable to use.

Main Application

Die cavity of molds

Bearings and other parts

Failure analysis of pressure vessel, steam generator and other equipment

Heavy work piece

The installed machinery and permanently assembled parts

Testing surface of a small hollow space

Material identification in the warehouse of metallic materials

Rapid testing in large range and multi-measuring areas for large-scale work piece

Technical Specifications

Error and repeatability of displayed value:

No.	Type of impact device	Hardness value of Leeb standard hardness block	Erro of displyed value	Reapeatability
1	D	760±30HLD 530±40HLD	±6 HLD ±10 HLD	6HLD 10HLD
2	DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
3	DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
4	D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
5	G	590±40HLD 500±40HLD	±12 HLG	12HLG
6	E	725±30HLD 508±40HLD	±12 HLE	12HLE
7	C	822±30HLD 590±40HLD	±12 HLC	12HLC

Measuring rangeHLD170∼960HLD

Measuring direction360°

Hardness ScaleHLHBHRBHRCHRAHVHS

Displaydot matrix LCD,128×64 dots

Data memory 500 groups max.relative to impact times 32∼1

Printing paper: width is 57.5±0.5mm, diameter is 30mm

Battery pack: 6V NI-MH

Battery charger: 9V/500mA

Continuous working periodabout 150 hoursWith backlight off, no printing

Communication interfaceUSB1.1

Outline dimensions212mm×80mm×32mm


Configuration

	No.	Item	Quantity	Remarks
Standard Configuration	1	Main uni	1
	2	D type impact device	1	With cable
	3	Standard test block	1
	4	Cleaning brush (I)	1
	5	Small support ring	1
	6	Battery Charger	1	9V 500mA
	7	Paper for printing	1
	8	Manual	1
	9	Instrument package case	1
Optional Configuration	11	Cleaning brush (II)	1	For use with G type impact device
	12	Other type of impact devices and support rings		Refer to Table 3 and Table 4 in the appendix.
	13	DataPro software	1
	14	Communication cable	1
	15
	16