2JP7.5 800kg Mining Air Scraper Winch Introduction

1.This series of 2JP7.5 800kg Mining Air Scraper Winches are powered by compressed air.

2. The2JP7.5 800kg Mining Air Scraper Winches are widely used in underground or open air to move the ores or fill staffs at the metal mines or other kind of mines.

3. The 2JP7.5 800kg Mining Air Scraper Winches are mainly used in horizontal slushing or the slope slushing with an angle of little degrees, but cannot be used as the lifting equipments

4.The 2JP7.5 800kg Mining Air Scraper Winch can be manually operated with people standing beside it.

5.The working way of the 2JP7.5 800kg Mining Air Scraper Winch is that there are wire-ropes entangled with drum pulling the scraper pan to do the shuttle movement for scraping the stuff

Features:

1.This 2JP7.5 800kg Mining Air Scraper Winch is powered by compressed air and it can be manually controlled. It's driven by the blade air motor and slowed down by gears. And it can rotate the drum to meet the working requirement by usage of braking the annular gear.

2.This 2JP7.5 800kg Mining Air Scraper Winch is equipped with one foot valve. When on operation, step the foot valve first, the winch start working, and then control the operation by handles. When off operation, release the foot valve, the winch stop working, it can achieve a longer life for the winch and air motor

Note

1.When on operation,step the foot valve first,the winch start working ,then control the operation by handles.
2.When off operation,release the foot valve,the winch stop working ,it can achieve a longer life for winch and air motor.

2JP7.5 800kg Mining Air Scraper Winch Parameter

2JP7.5 800kg Mining Air Scraper Winch Photos