Specifications

1 .grinder for sample preparation
2.Low working noise nd easy to clean
3. grinding the material of any kind of hardness

It is used for grinding the sample material of any kind of hardness to analyzable fineness quickly for component analysis.

 

Especially Suitable For:

The unit is especially suitable for sample preparation work in the laboratory of industrials of coal, electricity, nonferrous metal, metallurgy, chemic, environment-friendly department, scientific research and so on.

 

Advantages:

1. Make rapid grinding (1-3 minutes) by impact and friction force.

2. Full-sealed grinding chamber which meets the environmental protection requirements and without sample loss  for both dry and wet material.

3. Equipped with automatic timer to activate grinding.

4. Low working noisy and easy to clean.

5. Whole safety guard which meets the requirement of safety work.

6. The motor is special made with longer service life.

7. It can work normally on the flat ground without fixing any base.

 

 

Technical Parameter:

 

 

 

 

GM/F2000 Grinder for Sample Preparation
Model no.	-A	-B	-B2	-B3	-1	-2	-3	-4	-5	-6	-7
Bowl material	High manganese steel
Samples quantity per time	1	1	2	3	1	2	3	4	5	6	7
Feeding capacity(g/bowl)	400-500	200-300	(200-300)x2	(200-300)x3	100-150	(100-150)×2	(100-150)×3	(100-150)x4	(100-150)×5	(100-150)× 6	(100-150)× 7
Feeding size (mm)	≤26	≤20	≤20	≤20	≤16	≤16	≤16	≤16	≤16	≤16	≤16
Grinding time(min)	2-5	1-3	2-5	2-5	1-3	1-3	1-3	2-5	3-6	4-8	5-10
Discharging size(mesh)	80-300
Dimension (mm)	620x510x880							670x530x920	780x680x990
Total weight (kg)	165	158	165	180	150	160	180	200	220	250	280
Working power supply (v)	380
Motor power (kw)	(Special made motor)1.5