Specifications

1.Automatic cutter-chute division
2.PLC intelligent control and touch screen
3.Used for coal,coke or medium-hard material

2013 Combination Machine: Hammer Crushing and Dividing for Lab Sample Preparation 

 

1. Typical Applications:

 

This machine is used for making the coal, coke or medium-hard material samples to the size of less than 13mm, 6mm or 3mm (adjustable) and the weight of 1/2-1/16 of feeding material for component analysis by impact crushing, mixing, dividing and cleaning continuously. (The inspections show the sample accuracy of this machine meets the requirements of national standard and without any systematic difference.)

 

The unit is especially suitable for sample preparation work in the laboratory of industrials of coal, electricity, nonferrous metal, metallurgy, chemic, environment-friendly department, scientific research and so on.

 

 

2. Advantages:

 

•  PLC intelligent control and touch screen operation, It can achieve the crushing, mixing, dividing and cleaning automatically without manual operation and also can avoid the manual operating error.
•  The full automatic sample cleaning device insures no material blocking when the moisture content of material is less than 25%.
•  Automatic cutter-chute division system makes sure the representation of sample.
•  Equipped with failure alarm system and inquiry system.
•  The main parts are made of special material; the service life is 3-5 times of the normal one.
•  Automatic dusting device insures no dust leak out which meets the requirement of environment protection.
•  Full-sealed design meets the requirements of work safety. And the door makes daily maintenance more convenient.
•  It can work normally on the flat ground without fixing any base.

 

 

3. Technical Parameter:

 

Model No.	GM/PC-AN		GM/PC-BN
Feeding size (mm)	≤150mm		≤150mm
Discharging size(mm)	≤13mm or ≤6mm (Adjustable)		≤6mm or ≤3mm(Adjustable)
Division ratio (adjustable)	(About)1:2,1:4,1:8,1:16(Adjustable)		(About)1:2,1:4,1:8,1:16(Adjustable)
Handling capacity (kg/h)	800-1500	300-800
Moisture	≤25%	≤25%
Motor Power (kw)	4	4
Dimension (mm)	830*940*1980	830*940*1980
Working power supply(v)	380	380
Total weight(kg)	420	380