Specifications

1 CE Certified.
2 High frequency, less dust and noise, less risk of sample cross contamination.
3 OEM is available.

C-Tech vibration mills offer the full benefits of program – controlled grinding processes for the preparation of samples for x – ray fluorescence analysis. Control by programmable controller results in a substantial improvement in the reproducibility of sample preparation and consequently optimum analysis results.

Vibration grinding mills are suitable for the grinding of minerals, slags, ferro alloys, organic substances and other materials. The high speed of the drive motor enables even hard material to be ground with short process times. The robust design with twin eccentric disk bearings enable the grinding mills to achieve a long service life with a minimum of maintenance.

the grinding processes on the vibration mills are controlled reliably by a plc program. This eliminates incorrect handling or settings as sources of errors. The parameters can be accessed only through a password.

grinding vessels for a range of applications, with capacities of 10, 50 and 100 ml (steel and tungsten carbide) and 100 ml (agate) are available.

Manually operated clamping facility for the grinding vessels

 

C-Tech vibration grinding mills are fully encapsulated, insulated against noise, and have safety cut-outs for operator protection. The dust and noise burden at the workplace is therefore reduced considerably and the safety enhanced.

C-Tech vibration grinding mills are high-quality, precision engineering products with compact dimensions, and are therefore ideally suited to laboratory requirements.

The design of the machines correspond to the current german accident prevention and vde regulations. We reserve the right to make technical changes.

 

Type	ZHM-1A	ZHM-1B	ZHM-1T	ZHM-1V	ZHM-3B
Feature	Single-speed, Single-vessel	Single-speed, Single-vessel	Two- speed, Single-vessel	Frequency conversion, Single-vessdl	Single-speed, Three-vessel
Charging granularity	≤5mm
Discharging granularity	≤80μm
Vessel cubage	100cm3
Fill sample	20-70gram				(20-70)×3
Vessel material	Tungsten carbide, Chrome-steel, Manganese-steel
Power supply	AC380V±10%/50Hz/3-phase+earth
Rotate speed	1400r/min	960r/min	910/1400r/min	750-1550r/min	960r/min
Rated power	1.5KW	1.5KW	0.85/1.1KW	1.5KW	2.2KW
Dimension	650×600×960mm				710×810×1080mm
Net weight	180kg	180kg	180kg	180kg
Ambient temperature	5-40°C