Product Details

The scrap shear( SH EAGLEⅡ)can be used in all industrial demolition sites for the cutting and recovery of ferrous materials such as iron sections, pipes, tanks, railway carriages etc. that later may be easily recycled.

1.New Pearcing Tip:Bolted blades on piecrcing tip for fast Replacement.Eliminates time consuming rebuilding of the tip.

2.Double Guide:Twin guide for the movable jaw,ensures perfect alignment.

3.Frontal Blade:The front blade ensure accurate shearing with the tip and can be turned.

4.New Jaw design:New fixed jaw design increase cutting capacity,material is eased to fall away easily.

5.All New Blades:All the blades have been redesigned in a rhomboid shape to reduce stress on the jaw.Each blade can be turned effectively 3 times.The new blade are threaded for easier removal and installation.

6. Central Pin Adjustment Kit: Mantovanibenne have a unique central pivot pin layout. This allows for regular adjustment of the pin to ensure perfect shearing. While fully protected the pin can be removed for maintenance of all related parts.

7. Special Speed Valve: Reduced cycle times Regenerating power when required.Protection for the shear eliminating pressure peaks.

8. Rotating Group with Anticavitation Valve:360° continuous rotation. Always the best positioning of the shear.

9. All New Cylinders: Increased cylinder size for 20% more power. Forged cylinder rod for a better functionality and security . Reversed cylinder installation for full rod protection.

10. A unique total shear greasing system, ensuring all moving parts are regularly greased.

Quality is guaranteed

Faster

Safer

1.12 month after-sales warranty for hydraulic motor and cylinder.

2. We have the profession team (Pre-sale service, Technical team, After-sales service.) and will solve all your problems.

3.13 years working experience in this filed.

Nearby Ningbo and we promise the delivery time is within 7 days

o 1.We have joined the Trading Assurance

2. All products are packed by plastic paper with the wooden box.

Tip 1: Makesure of the weight of excavator, the oil flow and the working pressure of your excavator.

		SH100R	SH130R	SH180R	SH310R	SH410R	SH550R	SH700R	SH900R
Excavator weight (instead of bucket)	T	10-12	13-17	18-27	28-39	39-50	51-65	70-90	91-110
Excavator weight (instead of stick)	T	7-10	8-12	14-18	20-28	28-39	39-45	45-60	60-80
Tool weight without coupler	kg	980	1100	1900	2950	4400	5500	7400	9400
Cylinder force	T	76		109	145	200	247	299	397
Hydraulic working pressure	bar	250-300		320-350	320-350	320-350	320-350	320-350	320-350
Oil flow	l/min	90-110		150-200	200-250	250-300	275-375	500-600	600-700
Rotation type	/	360°	360°	360°	360°	360°	360°	360°	360°
Hydraulic motor max oil pressure	bar	190-200	90-100	90-100	100-115	100-115	100-115	140-150	170-190
Hydraulic motor oil flow	l/min	10-15	30-40	30-40	30-40	30-40	30-40	50-60	55-65
Time of closing at max oil flow	s	2,37		1,87	2,51	3,97	4,27	2,80	3,19
Time of opening at max oil flow	s	2,97		2,56	4,27	4,96	5,34	4,82	6,33
N of cycles per minute at max oil flow	cycles/min	11,2		13,5	8,8	6,7	6,2	7,9	6,3
N of revs per minute at max oil flow	revs/min	16,6	12	11,2	6,7	7,4	5,7	9,7	8,5
Hyd. ports size cylinder	/	3/4"GAS	3/4"SAE6000p.s.i.	1"SAE 6000 p.s.i.	1"SAE 6000 p.s.i.	1"1/4SAE 6000 p.s.i.	1"1/4 SAE 6000 p.s.i.	1"1/2 SAE 6000 p.s.i.	1"1/2 SAE 6000 p.s.i.
Hyd. ports size rotation	/	1/2"GAS	1/2"GAS	1/2"GAS	1/2"GAS	1/2"GAS	1/2"GAS	1/2"GAS	1/2"GAS
Hyd. ports size drain line	/	N.N.	N.N.	1/4"GAS	1/4"GAS	1/4"GAS	1/4"GAS	1/4"GAS	1/4"GAS
Speed value	/	YES	YES	YES	YES	YES	YES	YES	YES
Interchangeable wear parts	/	YES	YES	YES	YES	YES	YES	YES	YES
Automatic grease system	/	NO	NO	NO	NO	NO	NO	YES	YES

Tip 2: Make sure of the diameter and the cutting table of the object

	SH100R	SH130R	SH180R	SH310R	SH410R	SH550R		SH700R		SH900R
	mm	mm	mm	mm	mm	mm		mm		mm
Jaw opening A	375		445	565	670	760		830		965
Jaw depth B	395		525	630	720	780		840		930
Length C	2000	2100	2700	3300	3700	3950		4300		4600
Force at upper tips F1	55		75	110	151	185		215		290
Cutting force F2 (main blade centre)	138		198	286	413	478		552		707
Force at pin F3	472		770	1031	1372	1810		2081		2796
Material used to test St52	Rod	Tube	IPE	HEA	HEB	Plate	L profile		Rail vignola
Material used to test St52	mm	mm	mm	mm	mm	mm	mm		mm
SH100R SH130R	55	n.d	200	120	n.d	10	120*10		n.d
SH180R	60	n.d	270	140	n.d	12	120*12		n.d
SH310R	70	n.d	300	200	450	18	n.d		36
SH410R	90	n.d	450	320	n.d	20	200*24		n.d
SH550R	100	n.d	500	360	n.d	22	220*24		n.d
SH700R	120	n.d	600	400	n.d	25	240*24		n.d
SH900R	150	n.d	900	600	n.d	35	n.d		n.d