12.8V110Ah LiFePO4 battery pack for solar energy energy storage
USD $850 - $980 /Set
Min.Order:5 Sets
Ocell New Energy Technology Co., Ltd.
12.8V110Ah LiFePO4 battery pack for solar energy storage
Specification
This specification is applied to the LiFePO4 battery pack that manufactured by O’CELL . There is built-in smart PCM for over charge/discharge, over temperature protection. It owns RS485 interface for communication and LED status indicator.
Application: Automobile Starting battery.
Do not connect in series to more than 24V. Do not short-circuit. External fuse recommended.
No. | Item | General Parameter | Remark |
1 | Rated Capacity | 110.0Ah | Standard discharge(0.2C)after standard charge(0.2C) |
2 | Minimal Capacity | 107.0Ah | |
3 | Nominal Voltage | 12.8V |
|
4 | Life Expectation | Residual capacity is more than 60% of the rated capacity | 1) Charge: CC @ 0.2C to 14.6V, then CV till current to 0.05C 2) Rest: 30min. 3) Discharge: 0.2C to 10.0V Temperature:20±5°C Carry out 1500 cycles |
5 | Discharge cut-off voltage |
≥ 8.8V (2.2V/cell)
| Over-discharge protection release at 10.0V |
6 | Charging cut-off voltage |
≤ 15.6V(3.9V/cell)
| Over-charge protection release at 14.6V |
8 | Housing material | ABS+PC | Flame Retardant Plastic |
9 | Standard charge | 0.2C constant current (CC) charge to 14.6V,then constant voltage (CV)14.6V charge till charge current decline to ≤0.05C | Charge time : Approx 7.0h |
CONTACT ALEX: Sales11 AT
10 | Standard discharge | Constant current 0.2C Cut-off voltage 10.0V |
|
11 | Maximum Charge Current | 55A | 33A or less recommended for better performance and life |
12 | Maximum Continuous Discharge Current | 100A | Will shut off @ 105A for 35 seconds |
13 | Operation Temperature Range | Charge: 0~45°C | 60±25%R.H.
At lower temperature, the charge current should be smaller. |
Discharge: -10~60°C |