No.

Item

General Parameters

Remark

1

Nominal Voltage

48V

2

Nominal Capacity

100Ah

3

Charging cut-off voltage

3.65V/cell (≤54.75V)

adjustable

4

Discharge cut-off voltage

2.5V/cell (≥37.5V)

adjustable

5

Max. continuous

charge current

150A@23℃

200A (≤5 minutes)

6

Max. continuous

discharging current

50A@23℃

7

Charge terminals

350# Anderson plug + 50mm² cooper wires (300mm in length)

8

Discharge terminals

120# Anderson plug + 10mm² cooper wires(300mm in length)

9

Housing Dimension

585mm*345mm*228.5mm

10

Switch

LED in red

11

Communication port

RS485 interface, 5-pin aviation plug

12

Working temperature

-10℃~60℃

13

Storage temperature

-20℃~70℃

14

Relative Humidity

10%~80%,No condensation

15

Cooling method

Passive cooling

16

Housing

Black, Frosted cold rolled steel with handle

No.

Item

General Parameters

1

Charge protection

When the Battery is charged to full, they BMS would open the main relay/contactor.

2

Current Measurement

Current range from -200A (charging) to +100A (discharging) within the accuracy of ±0.5A.

3

Voltage Measurement

Voltage measurements should be accurate within 10mV/cell throughout the full operating temperature range.

4

SOC(state of charge)Measurement

State-of-charge (SOC) will be monitored via individual cell voltage measurements and the charge/discharge current. The SOC accuracy shall meet the accuracy listed below:

0 ~ 20% SOC:    5% accuracy (voltage-temperature

                               compensated)

20% - 80% SOC:  2% accuracy (coulomb counting)

80% - 100% SOC: 5% accuracy

5

RS-485 communication

RS-485 Communications will be used to communicate with the HOST

6

Analogue output

SOC analogue output: 0V~5V

7

Digital output

Two dry contact Digital Output. Customer can adjust the settings of voltage, current, SOC, temperature etc via monitoring software.

8

LED status display

5 LED indicators to show SOC. The battery need maintenance when the led light became red

Model

Description

Part No.

Major Parameters

24V60AH

V1.0 Standard

A2460

24V60AH, Max charging 2C (≤10 min.), 1C (continuous). Discharging 0.5C(continuous).

Charging terminal: 25mm² cable(300mm in length) & 120# Anderson Plug(gray);

Discharging terminal: 6mm² cable (300mm in length) & 50# Anderson Plug (gray);

V1.0 Standard + voltage regulator

A2460V

With voltage regulator

V1.0 Standard + Fuse

A2460F

With fuse

V1.0 Standard + voltage regulator +Fuse

A2460FV

With voltage regulator and fuse

V2.0 Standard

L2460A

The same function with A2460, But dimension is different

V2.0 Customized

L2460B

The same function with A2460, But dimension is different

24V40AH

Standard

A2440

24V40AH, Max charging2C (≤10 min.), 1C (continuous).

48V100AH

Standard

A48100

48V100AH, Max charging 2C (≤10 min.), 1C (continuous). Discharging 0.5C(continuous).

Charging terminal: 50mm² cable(300mm in length) & 350# Anderson Plug(gray);

Discharging terminal: 25mm² cable (300mm in length) &1250# Anderson Plug (gray);

48V200AH

Standard, Charging and discharging share same terminals

A48200

48V200AH, charging & discharging 1C (continuous). Charging & discharging terminal: 50mm² cable(300mm in length) & 350# Anderson Plug(gray)