Quick details

1. Function: The belt/harness used in construction, industrial, army, climb and electrical etc.

2. Material: Polyester, polypropylene

3. Color: red, orange, yellow, green, white, colorful (According to customer)

4. 3 “D” rings attachment point with 5 adjustable point.

5. Webbing width: 45mm or 55mm.

6. Harness belt webbing length:150cm/180cm/200cm

7.Belt webbing length: 110cm Diameter:11mm

8.Body harness has PE Environmental protection Back Cushion and Waist Cushion.

9.The hook is divided into small,middle and large.Small and middle hook is made by stamping.The large one is made by forging.

10.Safety hardware:Made by 45# steel.Chrome plated, Heat treated.

Safety harness details

1) Material: polyester/polypropylene fiber
2) Always wear your seat belt when the vehicle is in operation.
3) Adjust and wear the lap belt portion low and snug across your hips.
4) Each belt is intended to restrain only one person at a time; do not put two people under one belt.
5) Never attempt to restrain a child in your lap using the 3-point retractable seat belt around both you and the child; the child could be severely injured or even killed in the event of a collision.
6) Seat belts are matched sets; do not mix or use this belt or parts of this hames with other types of seat belts.
Packing: Usual practice: carton As per customers' requirements.

How to use safety harenss

(1) When you fasten the belt, set the buckle correctly and “D” rings position on rear side of the waist.

(2) The hook led to safety belt should be hung as high position as possible.

(3) The life rope should not be tied any of sharp angled object.

(4) Do not use the life rope to support yourself(For example, you bind it a pole to make “U” tenslon at your working on electric pole, etc.

(5) Do not use the safety belt which has once been damaged with impact, even if no difference in its out looking is recognized.

(6) Any of safety belts, having the following defects should not be used.

(a) Insufficient operation of safety cover of the hook.

b)Insufficient operation of the buckle’s lock.

c) Worn out life rope.

d)Kinked life rope.

e)Worn out threads on the stitched part on the belt.

f)Deiormed of eracked harness.

How to keep safety harness

1.Keep the safety belt exposed to the fresh air in the shade.

2.Keep the safety belt on a pole or a wll,not on the ground directly.

3.Be careful the life line not to kink.

4.Do not keep the safety belt in a room with chemicals(acid, alkaline substances, organic solvents, etc)

Our Services

Cooperate Mission

Supply with the highly cost-effective safety tools and equipment,providing superior quality, efficient service and competitive pricing to satisfy customer requirements.

Cooperate Vision

research and develop, manufacture and sales of safety tools and equipment, and value added fabrication service

Costomer first, Quality first, Quantity first, Serive first