Specifications
DTH hammer and DTH bits1.Working pressure:5-12bar
2.Air consumption:5-10m^3/min
3.Outside diameter:80mm
High and Low-medium pressure DTH hammer
Hammer length without bit(mm):758
Thread:T48*10*2
Outside diameter(mm):80
Wrench flat(mm):60
Weight(kg):21.5
Working pressure(bar):5-12
Air consumption(m^3/min):5-10
Instroction
DTH is abbreviation for "down the hole" . Low Air Pressure Down The Hole Drill Bit (DTH Button Drill Bit) is used to produce large-diameter holes in rocks, usually in the initial stage prior to blasting, but it is also used in non-blasting applications. DTH drilling are used mostly in mining quarries but can be used in a variety of other constrauction applications. The DTH drilling method is growing in popularity, with increases in all application segments, including blast-hole, water well, foundation, oil & gas, cooling systems and drilling for heat exchange pumps. Applications were later found for the DTH method underground, where the direction of drilling is generally upwards instead of downwards.
Specification
High pressure down-hole DTH hammer
2.5'' Hammer | GD2.5 | |
3.5'' Hammer | GD3.5 | |
HCD34 | ||
XF-3.5N | ||
4'' Hammer | GD340 | |
GQM.TD40 | ||
GF340AN/XF-340N | ||
GF.MISSION40 | ||
5‘’ Hammer | GD350 | |
GQM.QL50 | ||
GF350RN/XF-350N | ||
GN.MISSION50 | ||
GF.QL50 | ||
6'' Hammer | GD360 | |
GQM.QL60 | ||
GF360N/XF-360N | ||
GF.MISSION60 | ||
GF.QL60 | ||
8'' Hammer | GD380 | |
GQM.QL80 | ||
GF.QL80 | ||
GF.MISSION80 |
Model | Length mm | Thread | Outside Dia.(mm) | Weight | Air consumption(Bar) | Wrench (mm) | Air consumption(L/S) |
D84 | 1344 | 4 1/2"REG | 182 | 190 | 6/25 | 148 | 420/780/875L/S |
D64 | 1189 | 3 1/2“REG | 137 | 98 | 6/25 | 95 | 175/345/480L/S |
D54 | 1140 | 2 3/8”REG | 124 | 75 | 6/25 | 74-95 | 145/261/348L/S |
D44 | 979 | 2 3/8”REG | 99 | 40 | 6/25 | 74 | 105/185/250L/S |
D35 | 892 | 2 3/8”REG | 80 | 25 | 6/25 | 65 | 90/170/220L/S |
D24 | 868 | F42*10*1.5 | 70 | 20 | 6/25 | 55 | 70/120/180L/S |
DTH Hammer and bits photos