Main Products: Machinery ,cutting tools ,Abrasive tools ,Auto Maintenance Tools ,Machinery
General Purpose of T.C.T. Saw Blade For Aluminum cutting
USD $1.05 - $30.36 /Piece
Min.Order:200 Pieces
Quick Details View All >
Shanghai Z&S International Trading Co., Ltd.
Business Type: Trading Company
Shanghai ChinaMain Products: Machinery ,cutting tools ,Abrasive tools ,Auto Maintenance Tools ,MachineryProduct Details
General Purpose of T.C.T. Saw Blade For Aluminum cutting
T.C.T. Saw Blade For Wood T.C.T. Saw Blade For WoodT.C.T. Saw Blade For Wood T.C.T. Saw Blade For Wood
These blades are suitable for cutting woods,boards,alumiums alloy steel,plastics,non-ferrous metals, steels, composite material. T.C.T. Saw Blade For WoodT.C.T. Saw Blade For Wood T.C.T. Saw Blade For Wood T.C.T. Saw Blade For Wood T.C.T. Saw Blade For WoodT.C.T. Saw Blade For Wood T.C.T. Saw Blade
Features: T.C.T. Saw Blade For WoodT.C.T. Saw Blade For Wood T.C.T. Saw Blade For Wood
1. Material of Teeth: Micro Grained Tungsten Carbide Tips supplied from the worlds most advanced tungsten manufacturers ; T.C.T. Saw
2. Material of Saw Body: perfectly tensioned steel plates for true run;
3. Expansion Slot: Laser Cut Expansion Slots allow blade to expand and contact during heated operation;
4 . Noise Reduction Slots: Laser Cut Resin filled noise reduction slots on low noise blades;
5 .Tooth Model: Left & Right side bevel teeth, alternate top bevel teeth, trapeziform-flat teeth, flat teeth.
General Purpose of T.C.T. Saw Blade For Aluminum cutting
General Purpose of T.C.T. Saw Blade For Wood Cutting
| OD | Bore Diameter mm | Thckness mm | T-type | Teeth No. |
| 105mm/4'' | 20 | 1.2 | ZY | 24,30,40 |
| 115mm/4.5" | 20 | 1.2 | ZY | 24,30,40 |
| 125mm/5” | 20 | 1.2 | ZY | 24,30,40 |
| 150mm/6" | 25.4 | 1.2 | ZY | 24,30,40,60 |
180mm/7" | 25.4 | 1.5 | ZY | 24,30,40,60,80 |
| 205mm/8” | 25.4 | 1.5 | ZY | 24,30,40,60 |
| 235mm/9” | 25.4/30 | 1.8 | ZY | 30,40,60,80 |
| 255mm/10” | 25.4/30 | 2.0 | ZY | 40,60,80,100,120 |
| 305mm/12” | 25.4/30 | 2.2 | ZY | 40,60,80,100,120 |
| 355mm/14” | 25.4/30 | 2.2 | ZY | 40,60,80,100,120 |
| 405mm/16” | 25.4/30 | 2.5 | ZY | 60,80,100,120 |
| 455mm/18'' | 25.4/30 | 2.5/3.0 | ZY | 60,80,100,120 |
| 500mm/20'' | 25.4/30 | 2.5/3.0 | ZY | 60,80,100,120 |
| 550mm/22'' | 25.4/30 | 2.5/3.0 | ZY | 60,80,100,120 |
T.C.T Saw Blades for Cutting Aluminum and Other Alloy Materials
| OD | Bore Diameter mm | Thickness mm | T-type | Teeth NO. |
| 205mm/8'' | 25.4 | 1.8 | TP | 100 |
| 235mm/9'' | 25.4/30 | 1.8 | TP | 100 |
| 255mm/10'' | 25.4/30 | 2.0 | TP | 80/100 |
| 305mm/12'' | 25.4/30 | 2.2 | TP | 80/100/120 |
| 355mm/14'' | 25.4/30 | 2.2 | TP | 100/120 |
| 405mm/16'' | 25.4/30 | 2.5 | TP | 100/120 |
| 455mm/18'' | 25.4/30 | 2.5 | TP | 100/120 |
| 500mm/20'' | 25.4/30 | 2.5 | TP | 100/120 |
T.C.T Saw Blade for Cutting Steel Tube,Mild Steel,Copper Tube etc.
| OD | Bore Diameter mm | Thickness mm | T-type | Teeth No. |
| 100mm/4'' | 19 | 1.2 | PP | 20-30 |
| 125mm/5'' | 20 | 1.4 | PP | 20-30 |
| 150mm/6'' | 20 | 1.4 | PP | 24-48 |
| 185mm/7'' | 20 | 1.4 | PP | 24-48 |
| 200mm/8'' | 20 | 1.6 | PP | 24-60 |
| 230mm/9'' | 20/25.4 | 1.6 | PP | 24-60 |
| 255mm/10'' | 20/25.4 | 1.6 | PP | 24-80 |
T.C.T. Saw Blade Occasion Problems, Cause and Recommendation
| PROBLEM | CUUSE | RECOMMENDATION |
| Blade does not cut | Insufficient power chosen to permit saw blade to cut properly | Check power |
| Uneven segment wear | Misalignment of saw blade,blade is worn out of round | Check the machine and replace worn equipment. |
| Excessive wear | Horsepower and RPM are too high | Ensure proper HP and RPM |
| Cracken core | Saw blade is too hard for the material being cut,excessive cutting pressue and overheating cause loss of tension,so unblanced steel core cracks | C the dealer or manufacturer and use saw blde with a soft bond. |
| Loss of Tension | Saw blade is excessively hard for the material | Make sure saw blade is correct,consult the manufacturer |
| Arbor hole out of round | Saw blade is seated improperly | Make sure saw blade is properly seated on main shaft,tighen flanges properly. |
| Vibration | Improper power and RPM Chosen | Ensure proper RPM and power |
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln