Wholesale black galaxy 24 x 24 granite tile
USD $8 - $30 /Square Meter
Min.Order:200 Square Meters
Wholesale black galaxy 24 x 24 granite tile
Part One: Product Info.
Stone Name | Worldwide granite, China granite tile, Imported grante tile | ||||
Place of Origin | Worldwide | ||||
Stone Form | Blocks, Slabs, Tiles, Cut-to-size | ||||
Color | Blue, green, brown, black, Grey, Yellow , Pink, Red etc. | ||||
Finishing | Polished, Honed, Flamed, Sandblasted, Rough hammered, Bush hammered, Rough picked, Mushroom, Axe-cut, etc. and our edges finishing range has Eased, Beveled, Bull nose, Ogee, Cove, Dupont, laminated, non-laminated and etc. | ||||
Edge | Bush Hammer, Flat, Flamed, French …… | ||||
Finished Products | Slabs, Tiles, Skirtings, Window sills, Steps & Riser stairs, Kitchen countertops, Vanity tops, Work tops, Bollars, Columns, Curbstones, Paving stones, Cubes, Mosaic & Borders, Sculptures, Tombstones and Monuments |
Part Two: Cutting Size
L (cm) | W (cm) | H (cm) |
30.5 | 30.5 | 1.0 |
30 | 60 | 2.0 |
40 | 40 | 2.0 |
60 | 60 | 2.0 |
Custom cut to size |
Tolerance | +/- 1mm,2mm |
Glossiness | 80-100 |
Radiation Grade | A, B |
Part Three: Color selection
Part Four: Quality Control
Quality characteristics: |
1.thickness tolerance = ±1mm; length and width=±1mm. Spots, splits, damages and chips are not accepted. |
2. Tiles size tolerance: length and width=±1,0mm. |
2.1 Thickness 15mm - tolerance = ± 1,5 mm. |
2.2 Thickness 20mm and more - tolerance = ± 2,0 mm. |
3. Angle between 2 contiguous edges is 90 deg. |
4. Dyeing or color enhances are not allowed to use. |
5. Polish degree for polish surface - 80 up. |
Package and loading requirements: |
1. Gross Weight of the following goods: tiles, steps, risers package should not exceed 1100kgs. Gross Weight of paving stones package should not exceed 1500 kgs. The buyer agreement should be obtained in case packing over those limits. |
2. Attached crate's sheme is inalienable part of this PI. The wooden crate to be produced according to scheme as per attached crate's sheme. |
3. Crate wood material should be good qulity, spunk is not accepted. |
4. Crate frame board thickness - at least 20mm. |
5. Crate bearing bars are should be at least 50*60mm in cut. Side bars to be located at the ends of crate. Central bar to be located at the center of the crate between two side bars. |
6. Crate frame must be knocked together tightly and fasterned with wide metal stripe (clip) in the lower and upper part of vertical edge corner as per attached crate's sheme. |
7. Diagonal purlin bars must be located on the crate as per draw attached crate's sheme. |
8. Nails should not be knocked close to the board edge to avoid chips and damages of the products. |
9. There are no manufacturer trade mark on the crate, “N/M” should to be written instead of your company name. |
10. Products to be wrapped with protecting film. |
11. At least 7 plastic/metal bands (2 inner + 5 outer) to be applied for each crate. Bands are to be tight and fastern the crate. Slack is not accepted. |
12. Tiles package and stowing requirements: |
12.1. Tiles must be stowed face to face each other in vertical position. |
12.2. Stowing into crates: |
Part Five: Factory/ Loading/ Certificate
1.) Is sample free ?
Yes,free sample can be sent for testing the quality.
2.) What is the MOQ ?
Usually Our MOQ is 1x20ft container,and it can be mixed. But it’s negotiable, some other small quantity
is accepted.
3.) When we place an order, can we visit your factory to inspect the goods?
Yes,your visiting is highly appreciated.
4.) Why SRS stone?
We supply one-step solution and service for you. Professional supplier and manufacturer of building construction,
landscape paving, kitchen and bathroom tops.
Covers: marble floor, granite wall tile, cladding, indoor stair.
Kithcen countertop, vanity top, stone sink, kitchen cabinet.
Garden pavement, cube stone, patio paving, swimming pool coping, flagstone etc.
Over 13 years,SRS stone has being work to provide our customers with the best service.