Chinese cheap gold pocket trumpet
USD $300 - $350 /Piece
Min.Order:1 Piece
Tianjin Talents International Trade Co., Ltd.
Chinese cheap gold pocket trumpet
Chinese cheap gold pocket trumpet
Product name | Chinese cheap gold pocket trumpet |
Key | Bb |
Material | Brass body stainless steel valves |
Size | Bore size 11.60 mm Bell Dia 101mm |
Finish | Gold lacquer |
One piece of Chinese cheap gold pocket trumpet to be packed into a foam case, then into a carton
Trumpet brief introduction
A soprano brass wind instrument consisting of a long metal tube looped once and ending in a flared bell, the modern type being equipped with three valves for producing variations in pitch.
Maintenance
Cleaning/Bathing
The instrument should be “bathed” at regular intervals, i,e, Once a month. A bowl of warm water with a little
washing up liquid should be used. The mouthpiece should be removed after each lesson/practice and also should be washed out each month with warm soapy water.
Water Keys
Water should be”blown” from the instrument after each lesson/practice session. This is easily done by placing the
mouth around the mouthpiece and blowing, hold open each water key
Assembly
Attach the mouthpiece by placing it carefully into the lead pipe and giving a small twist to gently tighten into the pipe.
Don’t bang or twist the mouthpiece too hard or the mouthpiece will get stuck. If this happens, then ask your teacher if they can borrow a mouthpiece extractor to remove the mouthpiece.Don’t attempt to remove a stuck mouthpiece, especially with a vice and an adjustable spanner
Valves
Valves may become sticky for two reasons i.e, fails to “pop” back up in the usual way.
Valve needs oiling
Valve needs cleaning due to the build up of old oil, dirt and saliva.
To oil the valve, first remove the valve from its casting by unscrewing the top of the valve
Only remove one valve at a time
Apply a few drops to the area of the valve with the holes, try not to oil inside the holes as the oil collects and causes wastage.
Return the valve to its casting and turn the valve clockwise until you hear a “click”
Make sure the valve is aligned correctly, the instrument will not produce a note if it is not
Check the valve for dirt. If dirt is evident, rinse with lukewarm water and rub gently with a lint free cloth.
This may take a while but when clean, rinse thoroughly and oil.
Slides
A number of slides can be removed from the cornet, Each slide should be cleaned and lubricated.
Pull the slides out completely and clean the outer section with a cloth and warm water. Once clean, a small amount of vaseline should be placed onto the internal slides sections. Ensure slides are re-inserted correctly
1.What is your leading time?
The production time is about 20 days and shipping time is about 15 days
2. What is your term of payment?
TT,Paypal, WestUnion, Trade Assurance
3. What is your normal Express route?
UPS, FEDEX, DHL, EMS
Company Profile
We are a professional musical instrument supplier in Tianjin,China for nearly ten years. We specialize in brass wind musical instruments, woodwind musical instruments, string musical instruments and percussion instruments as well as relevant fittings. Welcome to contact us!
Address: A-1902, NO.89, HUANGPU SOUTH ROAD, HEXI DISTRICT 300201 TIANJIN CHINA
TEL: 86- 22- 28376666
FAX: 86-22- 28376667
Website:
Contact person: Karen Wang
Related Items Recommended
Clink the following photos for more information
Other same items recommended as follows:
Art NO. | Key | Material | Size | Finish |
TAL-M350G-JY | Bb | Brass body,Slides(two set),Monel Valves | 11.65mm,Bell DIA.123mm | Gold lacquaer |
TAL-M300G-JY | Bb | Rose BrassBell,Cupronickel Valves, Rose brass lead pipe, Monel Valves | 11.65mm,Bell DIA.123mm | Gold lacquaer |
TAL-E100N-JY | Bb | Brass body, Cupronickel Valves | 11.65mm,Bell DIA.123mm | Nickel plate |
TAL-A400G-JY | Bb | Rose BrassBell,Cupronickel Valves, Rose brass lead pipe,Monel Valves | 11.65mm,Bell DIA.123mm | Gold lacquer |