Specifications

Plastic Pipe Cover
1. Size: 1/8''-30''
2. Color: Yellow, blue, white, black, red, green

Plastic Pipe Cover  

 

 

Characteristics:

 

1.Material: Low-Density Polyethylene

2.Color: Refer to Chart

3.it is fit for Standward:GB,ASTM / ASME B36.10M,API,AWWA,BSP,DIN 3A,SMS,GOST ,JIS and so on .

4.Size :1/4“(6mm) to 30.”(762mm)” nominal bore size and complemented with over 120 additional provide tight fit and release pressure build up.

5.Minimum temp. of use: -40°C

6.Fusion temperature: 120°C Elongation: 500 %

It is the material most used in our products as it possesses good chemical characteristics, as well as showing good resistance to knocks, given its elasticity and softness. From a temperature point of view, the recommended range of use is between -40° and +60°

 

 

Specification:

Dimensions OD(mm) ( φ )
6	26.7(3/4”)	57	108	168.3(6“)	305	609.6(24”)
6.3	28	60.3(2”)	110	180	315	630
8	30	63	113	190	318	660.4(26“)
9.53	32	63.5	114.3(4“)	194	323.9(12”)	711.2(28”)
10.3(1/8“)	33.4(1“)	67	121	200	325	720
12	34	70	125	205	345	762(30“)
12.7	35	73(2 1/2“)	127	216	355.6 (14“)	812.8(32”)
13.7(1/4”)	38.1	75	129	219.1(8”)	365	820
15	40	76.2	133	225	377	863.6(34“)
16	42.2(11/4”)	80	139.7	245	395	914.4(36”)
17.1(3/8“)	45	83	140	250	406.4(16”)	965.2(38“)
18	48.3 (11/2“)	85	141.3(5”)	255	426	1016(40”)
19	50	88.9(3”)	152	267	457.2 (18“)	1066.8(42“)
20	51	90	154	273(10“)	480	1219.2(48”)
21.3	52	95	159	280	508(20”)	1422.4(56“)
22	53	102	160	285	530	1524(60”)
25.4	54	104	165	299	558.8 (22“)