Filament Spunbond Non-woven Geotextile for infrastructure construction
Negotiable /Square Meter
Min.Order:4 Square Meters
Laiwu Starring Project Material Co., Ltd.
Filament Spunbond Non-woven Geotextile for infrastructure construction
Product Description
non woven needle punch geotextile is made by Dacron filament ,featured with good physical property,high tensile, resisiting tearing,bursting,stabling,etc.Itboasts excellent drainage,separation,filtration and protection performance.
Product Features
Geotextiles provide three main functions to the roads:
Separation
Woven Geotextile provide long term separation of the aggregate base from the subgrade soil. By separating these
two materials, the Geotextile maintains the original thickness of the roadway aggregate. This is the most important
Geotextile function for roads, particularly where the road is being constructed on weak subgrade soils.
Filtration and Drainage
Geotextile allows the ground water to pass into the subsurface drain without eroding the soil and helping the
ground from deterioration making the life of the roads very long.
Stabilization
Higher strength PP and polyester woven geotextiles provide strength to the roads thus making it increment in the
effective bearing capacity of low strength sub-grade soils and increase the life of the roads.
Application Range
Widely used in highway, railway,dam,coastal shoal engineering reinforcement,inverted filter,i
slation and drainage.
Product Specifications and Technical Parameters
NO.
| Item Specification Value |
Specification
| ||||||||||
100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 800 | ||
1 |
Weight Variation % | 6 | 6 | 6 | 5 | 5 | 5 | 5 | 5 | 4 | 4 | 4 |
2 |
Thickness mm | 0.8 | 1.2 | 1.6 | 1.9 | 2.2 | 2.5 | 2.8 | 3.1 | 3.4 | 4.2 | 5.5 |
3 |
Width Variation % | 0.5 | ||||||||||
4 | Breaking Strength KN/m | 4.5 | 7.5 | 10.5 | 12.5 | 15.0 | 17.5 | 20.5 | 22.5 | 25.0 | 30.0 | 40.0 |
5 | Elongation Break % | 4080 | ||||||||||
6 | CBR CBR Mullen Burst Strength KN | 0.8 | 1.4 | 1.8 | 2.2 | 2.6 | 3.0 | 3.5 | 4.0 | 4.7 | 5.5 | 7.0 |
7 | O9095 Sieve Size O90 mm | 0.070.2 | ||||||||||
8 | Vertical Permeability Coefficient cm/s | (1.0-9.9)×(10-110-3) | ||||||||||
9 | Tear Strength KN | 0.14 | 0.21 | 0.28 | 0.35 | 0.42 | 0.49 | 0.56 | 0.63 | 0.7. | 0.82 |
|