| Bathroom Shower Tray |
| deep shower tray |
| fiberglass deep shower tray |
| Bathroom Shower Tray made via SMC |
| In stock fiberglass shower tray/shower base/shower pan: |
 | |
Item: OL9090AS Dimensions: 900*900*40 (mm) Packaging: 930*930*50 (mm) Weight: 14.50KGS Specification: With lips on 3 sides | Item: OL9090EU Dimensions: 900*900*40(mm) Packaging: 930*930*50 (mm) Weight: 14.50KGS Specification: Without lips,flat |
| |
Item: OL9090AT Dimensions: 900*900*40 (mm) Packaging: 930*930*50 (mm) Weight: 14.50KGS Specification: With lips and stainless steel grate | Item: OL12090AS Dimensions: 1200*900*40 (mm) Packaging: 1230*930*50 (mm) Weight: 17.50KGS Specification: With lips on 3 sides |
| |
Item: OL9090R Dimensions: 900*900*40 (mm) Packaging: 930*930*50 (mm) Weight: 14.50KGS Specification: Round,without lips | Item: OL12080EU Dimensions: 1200*800*40 (mm) Packaging: 1230*830*50 (mm) Weight: 14.50KGS Specification: Without lips,flat |
| Procedure for SMC process: |
| 1. The material of moulds will be depended on your requirements on products and total quantity. Usually we use steel 45#, 60#, Chrome 40, P20 or 718.
2. Core and Cavity surface with Chrome plating can prolong mould life and surface glossy of products. |
| 1.We have our own complete production line for fiberglass sheet, from raw material, including fiberglass mat, resin and other fillers.
2.We have material engineers, who can adjust the material components according to your detailed requests such as strength, fire resistance rating, color and so on. |
| 1.We have compression machine from 60 tons to 2000 tons, which enable us to produce items with maximum projected area 4 square meters
2.According to products, we will adjust working pressure, working temperature,solidifying time for the machine. |
| 1. Trim the burrs and then polish the surface. Painting is available if you required painted surface
2.Special fextures are used to correct the deformation caused by the draft angle if necessary. |
| Every piece will be wrapped with air bubble paper, then packed into carton boxes or plywood shelves. |
| Our principle: safe and economical: |
Packaging: 1.Air bubble packaging 2.Plywood Crate or shelf packaging 3.Carton packaging We choose economical packaging on condition that there will be no damage during transportation. Shipping: We are very glad to get the freight cost information for you as we have forwarders which have been cooperated for a long time. |
|
| Our workshop and office: |
|
|
| Quality Control: |
|
| Why choose us: |
| 1) 8 years' experience in fiberglass product trading, have good knowledge on process, quality control, request on different products, ready to offer international service for you. |
| 2) Complete production line from fiberglass sheet to mould and finished products,which keeps a better quality control and will also save cost for you. |
| 3) Hydraulic Press Machines with capacity from 60 to 2000 tons, which enable us to make products with maximum projected area of 4 square meters, so that we can meet your different size requirements. |
| 4) 150km away from Shanghai Port, which will shorten the delivery time and save freight cost for you. |
| Q1: What equipments do you have for SMC process? |
| A: Owning 60ton to 2000ton hydraulic compression machines, we can produce the items with maximum projection area 4 square meters. The equipment details is 60ton*3, 200ton*3, 315ton*4, 630ton*3, 800ton*1, 2000ton*1 |
| Q2: What's the advantage of your SMC products? |
| A: Owning complete production line from fiberglass sheet, mould to finished products, makes us save cost and provide cost-effective products for you. |
| Q3: Why is the mould cost of SMC process so high? |
| A: Comparing to hand lay up process, the mould cost of SMC process is very high because the moulds are with complicated structures, which are used on the high loading compression machines to make the products. But this can be paid back by the much lower unit prices. The mould prices vary according to the different material 45#, 60#, Chrome 40, P20 or 718, which will be decided according to your request on the mould life. |
| Q4: Which market have you exported your products to? |
| A: Europe, North America, Australia, New Zealand, Middle East. The products are applied as auto parts, motorcycle parts, construction parts, public facilities(like telephone booth), marine parts, industrial machine parts, household parts, etc. This makes us know well about the request from these market and product. |
| Q5:What process are you specialized in? |
| A:We are good at SMC(Sheet moulding Compression), hand lay up and RTM process |
| Q6: Which process is suitable for my products? |
| A: Please just send your product details to us and our engineer will evaluate for you, based on your annual quantity, product structure, your detailed request, etc. |
| Q7: How far is your factory from the airport? |
| It's about 100km from Shanghai Pudong International Airport to our factory. We are warmly welcome you to visit us for knowing our capability and our production lines. |