EN10253 S235 Long Radius 45 Degrees Elbow
Negotiable /Bag
Min.Order:1 Bag
CANGZHOU HAOYUAN PIPE FITTING MFG CO.,LTD
45 degree bend production engineering requirements to control the radius of curvature. Such as a radius of 1.5D, then the radius of curvature must be within the required tolerance. As most of these pipes for welding, in order to improve the quality of welding, the end of the car into a groove, leaving a certain angle, with a certain side, this requirement is also more stringent, more thick side, the angle of the number and deviation range Have provisions, geometric size than the tube more than a lot of items. Elbow surface quality and mechanical properties of the basic and the tube is the same. In order to facilitate the welding, and the steel pipe is connected to the same material.
Seamless elbow 45 degrees
Nominal Diameter | Outside Diameter | Center to End | Center to Center | Back to Face | ||||||
45°Elbow | 90°Elbow | 180°Elbow | ||||||||
B | A | O | K | |||||||
DN | NPS | Series A | Series B | Long | Long | Short | Long | Short | Long | Short |
15 | 1/2 | 21.3 | 18 | 16 | 38 | - | 76 | - | 48 | - |
20 | 3/4 | 26.9 | 25 | 19 | 38 | - | 76 | - | 51 | - |
25 | 1 | 33.7 | 32 | 22 | 38 | 25 | 76 | 51 | 56 | 41 |
32 | 1.1/4 | 42.4 | 38 | 25 | 48 | 32 | 95 | 64 | 70 | 52 |
40 | 1.1/2 | 48.3 | 45 | 29 | 57 | 38 | 114 | 76 | 83 | 62 |
50 | 2 | 60.3 | 57 | 35 | 76 | 51 | 152 | 102 | 106 | 81 |
65 | 2.1/2 | 76.1(73) | 76 | 44 | 95 | 64 | 190 | 127 | 132 | 100 |
80 | 3 | 88.9 | 89 | 51 | 114 | 76 | 229 | 152 | 159 | 121 |
90 | 3.1/2 | 101.6 | - | 57 | 133 | 89 | 267 | 178 | 184 | 140 |
100 | 4 | 114.3 | 108 | 64 | 152 | 102 | 305 | 203 | 210 | 159 |
125 | 5 | 139.7 | 133 | 79 | 190 | 127 | 381 | 254 | 262 | 197 |
150 | 6 | 168.3 | 159 | 95 | 229 | 152 | 457 | 305 | 313 | 237 |
200 | 8 | 219.1 | 219 | 127 | 305 | 203 | 610 | 406 | 414 | 313 |
250 | 10 | 273.0 | 273 | 159 | 381 | 254 | 762 | 508 | 518 | 391 |
300 | 12 | 323.9 | 325 | 190 | 457 | 305 | 914 | 610 | 619 | 467 |
350 | 14 | 355.6 | 377 | 222 | 533 | 356 | 1067 | 711 | 711 | 533 |
400 | 16 | 406.4 | 426 | 254 | 610 | 406 | 1219 | 813 | 813 | 610 |
450 | 18 | 457.2 | 478 | 286 | 686 | 457 | 1372 | 914 | 914 | 686 |
500 | 20 | 508.0 | 529 | 318 | 762 | 508 | 1524 | 1016 | 1016 | 762 |
550 | 22 | 559 | - | 343 | 838 | 559 | 1676 | 1118 | 1118 | 838 |
600 | 24 | 610 | 630 | 381 | 914 | 610 | 1829 | 1219 | 1219 | 914 |
650 | 26 | 660 | - | 406 | 991 | 660 | 1982 | 1320 | - | - |
700 | 28 | 711 | 720 | 438 | 1067 | 711 | 2134 | 1422 | - | - |
750 | 30 | 762 | - | 470 | 1143 | 762 | 2286 | 1524 | - | - |
800 | 32 | 813 | 820 | 502 | 1219 | 813 | 2438 | 1626 | - | - |
850 | 34 | 864 | - | 533 | 1295 | 864 | 2590 | 1728 | - | - |
900 | 36 | 914 | 920 | 565 | 1372 | 914 | 2744 | 1828 | - | - |
950 | 38 | 965 | - | 600 | 1448 | 965 | 2896 | 1930 | - | - |
1000 | 40 | 1016 | 1020 | 632 | 1524 | 1016 | 3048 | 2032 | - | - |
1050 | 42 | 1067 | - | 660 | 1600 | 1067 | 3200 | 2134 | - | - |
1100 | 44 | 1118 | 1120 | 695 | 1676 | 1118 | 3352 | 2236 | - | - |
1150 | 46 | 1168 | - | 727 | 1753 | 1168 | 3506 | 2336 | - | - |
1200 | 48 | 1220 | 1220 | 759 | 1829 | 1219 | 3658 | 2440 | - | - |
High-quality products
Two 45-degree elbows can not be welded into a 90-degree bend to use, because the stress concentration area is the elbow pipe, expansion and most of the stress deformation during cooling are released at the elbow. Also weld itself to be the weak link, fatigue deformation will soon cause cracking damage, which planted a lot of hidden dangers, so do not at immediate convenience, eventually leading to huge losses.
Elbow Workshop
Our packaging
Sales Network