the converter is a using pulse width modulation (PWM), non isolation type switch stable voltage power supply, the input voltage 12V to 36V output, using imported high power integrated switching regulator module as the core, the unstable of 10 - 16V DC power converter for stable 36V DC power output. With high conversion efficiency, stable performance and other characteristics, input voltage, output current, over temperature, output short circuit and other automatic protection function, and the recovery of normal work after the fault elimination. Especially suitable for car audio, LCD TV, radio, monitoring system and mechanical equipment, etc..

Main performance parameters:
Input voltage: DC16V - DC10V
Output voltage: DC36V + 5%
Output current: 12.5A
Working temperature: -20 degrees C - +55
Conversion efficiency: >90%
Rated power: 500W
Peak power: 800W (MAX)
Quiescent current: <100mA
Size: long 140MM, wide 87MM, high 52MM

Note: the installation of the positive / negative polarity, to avoid the output side of the short circuit (otherwise burn the fuse )
Use requirements:
Working environment temperature: -10 to +70
The input of the wire cross section is 2.5mm2
The output end of the wire cross section is 2.5mm2
Good ventilation converter must be installed in the car, no flammable substances, not water.
Input and output power polarity direction shall not be connected to the wrong, not arbitrarily large, small fuse.

 there are othere spec. of   12 TO 36V DC-DC as follows

   12 v to 36v,16a,600w

other similar products

DC -DC Boost converter Spec. is as follows

12v to 24v,5A                               12V TO 48V,2A                       24V TO 48V,10A

12V to 24v,10A                            12V TO48 V,5A                       24V TO 48V,20A

12V to 24V,15A                            12V TO 48V,10A                24V TO 48V,30A

12V TO 24V,20A                           12V TO 36V 10A       

12V TO 24V,25A                            12V TO 36A  5A

12V TO 24V,30A

DC Boost Power Series

Product Description:This product is a pulse width modulation (PWM) mode, the non-isolated power supply, the input voltage is converted into a stable Output voltage, a high conversion 

, stable performance characteristics, are widely used in the automotive industry ,

 new energy, industry and other fields.

The main parameters:

Note:

1,Do not short the output, check the wiring is correct before power

Installation environment must be kept dry, keep the air circulating coolin