6000W HF/PFC Battery Charger
Advantages
1. Internal integrated PFC, no pollution to electric network,
avoids shocking on electric network from heavy current.
2. Wide input voltage range AC85V~AC265V available for
worldwide requirements, convenient for electric-network
fluctuation and vehicles exportation.
3. High with 93% above efficiency while only about 80%
efficiency the traditional chargers can meet.
4. Intelligent temperature compensation function in the charging
process, preventing the damage to battery caused by charge-off
or charge due, greatly extending the lifespan of the battery.
5. Fully-sealed and water-proof, protection class IP46. Shock
resistance treatment made inside makes vibration-proof level up
to SAEJ1378 that can fully meet the standard of automobile
appliance usage.
6. Available for various kinds batteries like lead-acid, LiFePO4
battery etc., Flexible and programmable of the charging mode
and preset in 10 unique algorithms. Equipped with CAN
communication interface to realize real-time communication with BMS

 Protection Features

1. Thermal Self-Protection: When the internal
temperature of the charger exceeds 75°C, the charging
current will reduce automatically. If exceeds 85°C, the
charger will shutdown protectively. When the internal
temperature drops, it will resume charging automatically.
2. Short-circuit Protection: When the charger encounters
unexpected short circuit across the output, charging will
automatically stop. When fault removes, the charger will
re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is
polarity reversed, the charger will disconnect the internal
circuit and the battery, the charging will stop and avoid
been damaged
4. Input Low-voltage Protection: When the input AC
Voltage is lower than 85V, the charger will shutdown
protectively and automatically resumes working after the

volt is normal again