AHEVC Series on-board charger absorb the advanced control technology is located, it is a practical, full-featured, high-reliability products. Light weight, volume
Small, charging stability, high efficiency, seismic capability features. Short circuit, reverse polarity, overheating, overload protection. Reasonable charge curve and control technology to control the charging process to ensure that
Sufficient battery power and extend battery life.
1, for battery type: lithium iron phosphate batteries, lithium manganese batteries, three batteries, nickel-metal hydride batteries
2, operating temperature: -30 ℃ ~ 80 ℃
3, the protection function: over-voltage, over current, reverse polarity, short circuit, over temperature
4, power factor: 0.99, harmonic distortion rate: 3%
5, means of communication: CAN 2.0B
6, reference standards: QCT 895-2011 "Electric Vehicle Conductive car charger"

Design reference standard

QCT 895-2011 Electric Vehicle Conductive Car Charger

QC / T Electric Vehicle Conductive Charge Car Technical conditions

SAE J1378 SAE J1939

3., technical indicators:

  1) the input voltage: 85 ~ 265Vac

  2) input frequency: 50 ~ 60Hz

  3)starting inrush current: <10A

  4) the input power factor: 0.99

  5)harmonic distortion (THD): ≤5%

  6) full load efficiency: ≥0.93

  7)means of communication: CAN 2.0B

  8)the auxiliary power supply: 12Vdc / 150W

  9)protection class: IP65

  10)Altitude: ≤3000m

 11) operating temperature: -30 ℃ ~ 75 ℃

12) over-temperature protection: when the temperature is higher than 45 ℃ , the fan starts, the fan stops it is lower than 45 ℃, when it is higher than 75 ℃ ,the protection is shutdown, it can be  Automatically restored when the temperature is  less than 75 ℃

13)short-circuit protection: output short circuit, output is 0, after  the fault is removed,it can be automatically restored

14)reverse polarity protection:  if The output terminal is reversed, the charger does not start,

  the fault is removed,it can be automatically restored

15)overvoltage protection: according to the highest value of the CAN settings, over-current protection: according to the highest value of the CAN settings, voltage protection: 50V

Panel schematic instructions

our   company specialized in the manufacture and export of electric system products ,  including,pure sine wave power inverter, motor controller,charger,DC-DC converter,electronic throttle,battery discharge indicator,hour tachometer ,air conditioning system,electric system solution .etc