Specifications
1.excellent tensile,2.high tenacity,
3.against cracking,
4.impact and fatigue
1. Introduction
Chopped steel fiber is made from high quality low carbon steel wire.It is produced through craping,choping and mixing.This kind of steel fiber is widely used as the brake pad in motocycle,car,lorry,train,airplane,etc.Now it is fully replaced the asbestos,has the good feature of stability,low rate of friction and good heating dissipation.
2.Usages:
highway road surface,tunnel,building,airport road surface and so on
3.Technical data
Grade | T0-160 | T1-80 | TA1-80 | T0-80 | T3-80 | T3-60 | T6-80 | ||
Screen Analysis
100g/10 minute | 14# | 0-0.5 | 0-0.5 | 0-0.5 | 0-1 | 0-1 | 0-1 | 0-1 | |
20# | 0-2 | 0-1.0 | 0-2 | 0-5 | 0-5 | 2-5 | 1.5-6.0 | ||
40# | 2.0-5 | 2-12 | 3-8 | 5-15 | 5-25 | 10-20 | 12-20 | ||
70# | 10-25 | 14-25 | 14-20 | 15-30 | 10-25 | 20-30 | 15-30 | ||
100# | 10-20 | 10-20 | 10-14 | 5-25 | 5-20 | 10-25 | 15-25 | ||
Screen Bottom | 50-75 | 50-68 | 60-75 | 50-65 | 50-60 | 25-45 | 20-48 | ||
Tap density (ml/100g) | 0.80-1.05 | 0.80-1.10 | 0.78-0.85 | 0.80-1.10 | 0.80-1.05 | 0.95-1.30 | 0.95-1.30 | ||
Oil content (%) | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | ≤0.15 | ||
Fiber width | Min | 0.0127 | 0.0360 | 0.0310 | 0.0318 | 0.0635 | 0.1410 | 0.1410 | |
Max | 0.0381 | 0.0598 | 0.0635 | 0.0635 | 0.0889 | 0.2072 | 0.2072 | ||
Chemicals content | C Mn P S Si 0.07-0.12 0.8-0.125 <0.03 <0.03 ≤0.07 |