industrial product, buy FN510 Field Wireless Multi-Function Module on China Suppliers Mobile

Product Details

Product Information

FN510 Field Wireless Multi-Function Module

Field Wireless Multi-Function Module with “Field Wireless Communication Module FN110” is connectable with a field wireless network as a field wireless device. This product acquires sensor data from a connected sensor and transmits it to a field wireless network through FN110. Refer to General Specifications of “Field Wireless Communication Module FN110” for an overview and detailed information.

• Various Input / Output functions:

Analog input, digital input/output or pulse input are selectable.

• Connect various sensor to the field wireless network:

This product transmits sensor value acquired from a 4-20 mA analog device to the host system via field wireless network.

• Installation flexibility:

Cable elimination allows installing a device at locations where it was previously either inaccessible or cost-prohibitive because of cable management and cost.

• Small and lightweight housing with LCD:

This product has a small and lightweight housing with a built-in LCD that displays the process data and communication status.

Specifications

Power Supply

Specifications

Battery

Dedicated battery pack

Rated voltage: 7.2 V

Rated capacity: 19 Ah

Battery Pack:2x primary lithium-thionyl chloride batteries

With battery case (batteries sold separately)

Performance

Specifications

Update Period

1 to 3600 s selectable*

*: When using the digital output, more than 2 s is accepted.

Battery

Characteristics

Typical battery life when using analog input or digital input is 10 years* 1 or 7 years* 2 and when using digital output with always on is 3 years* 3 or 2 years* 1 in the following conditions.* 4

• Ambient temperature: 23 ±2°C

• Device role: IO mode

• LCD display: off

*1: Update period: 10 s

*2: Update period: 5 s

*3: Update period : 30 s

*4: Environmental condition such as vibration and the type of connected device may affect the battery life.

Functional

Specifications

Input

See Table 1.

Power Supply

Power supply to the FN110

Supply voltage: 3.5 V

Supply current: 50 mA

Installation

Environment

Ambient

Temperature

Limits

Operating: -40 to 85°C (attitude up to 3000 m)

-30 to 80°C (LCD visible range)

Regulatory

Compliance

Statements

EMC Conformity

Standards

EN61326-1 Class A Table 2 (For use in industrial locations),

EN55011 Class A

Degrees of

Protection

IP66

rating applies when the connector is properly tightened.

Explosion-Proof

Types

TIIS, FM (United States or Canada), ATEX, IECEx (approvals under pending)

Physical Specifications

Weight

500 g (without mounting bracket, clamp, and battery)

Table 1. Input / Output Function Summary

*1: The input channels are non-isolated and share one common ground.

*2: Do not apply a voltage to a DI or PULSE from the outside.

*3: The digital output terminal is configured as open-drain. The voltage and current applied to a digital output terminal should be within the specified range.

*4: Minimum time required to detect an eternal contact becomes off.