Rider Glass –19mm Clear Beat Tempered/Toughened/Safety Glass wholesale
 

Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.

4-5 times stronger than annealed glass of the same thickness.

Stronger resistance to thermal breakage than annealed or heat strengthened glass

If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.

Conforms to AUSTRALIA AS/NZS 2208 and Issued by SAI Global AMK 40195 . All work done on glass (beveling, cutting, bending, etc) must be done before tempering.

Ideal for areas with high wind loads and areas where human contacts is an important consideration, Rider’s tempered glass is the perfect option for architects who must meeting building codes and safety requirements. Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units (see table below). These safety features also make it an exemplary choice for automotive applications. Guaranteeing quality, Rider applies heat soak testing to all of its tempered glass before packaging and loading. It is available in all of Rider’s standard float thicknesses and sizes.

Considering the characteristics of tempered glass, glass size should be confirmed before making production. Once tempered glass size is confirmed, tempered glass can not be made mechanical treatment any more, otherwise, it will be broken. If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.

 ASSURE your goods INTACT till to your WAREHOUSE,Wherever you are.

 Advantages of tempered glass with Australian certification:

- High intensity
The strength is 3-5 times of ordinary annealed glass;

- Wind pressure resistance
The wind pressure resistance is 1.5-3 times of ordinary annealed glass;

- Heat shock resistance
The heat shock resistance is 3 times of ordinary annealed glass;

- Safety
If it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.

1. 4-5 times stronger than annealed glass of the same thickness.
2. Stronger resistance to thermal breakage than annealed or heat strengthened glass
3. If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
4. Suitable for use as a safety glass as defined by consumer product safety association 16CFR 1201, ansiz 97.1 1984 and BS6262.
5. Conforms to AS/NZS 2208 and Issued by SAI Global AMK 40195. All work done on glass (beveling, cutting, bending, etc) must be done before tempering.

Parameters

1. Visible Light Transmittance ≥ 91%
2. Iron content:≤120ppm Fe2O3
3. Density: 2.5g/cc
4. Yong’s Module: 73Gpa
5. Tensile Strength: 42Mpa

Colors

1. Blue: Sky Blue; Lake Blue; Dark Blue; Royal Blue
2. Grey: Euro Grey; Dark Grey, Mist Grey
3. Green: F. Green (Light Green), Dark Green
4. Bronze: Golden Bronze, Red Bronze
5. Pink
6. Golden
7. Clear etc.

Thickness

3mm,4mm,5mm,5.5mm,6mm,8mm,10mm,12mm,15mm,19mm etc.

The edge opions of tempered glass:
 For the glass edges, we can make the Flat polished edges, Pencil polished edges, Bevel edges, Ogee Edges, Triple pencil edges, Triple Ogee edges, Long Ogee edges, Convex Edges.

Why choose us?

Rider Glass’ advantage

1.        We manufacture a wide range of glass to meet your different demands: Clear Float glass, Tinted glass, Stained glass, Laminated glass, Mirror glass, Aluminum mirror, Silver mirror, Reflective glass, Online coated glass, Patterned glass, Figured glass, Wired glass, Colored glass, Tempered glass, Toughened glass, Safety glass, Shower doors glass, Emulsificated glass, Acid-etched glass, Obscure glass, Sandblasted glass, Solar glass, Ultra clear low iron glass, Low-E glass, Obscure glass, Glass block, Glass brick, Picture frame in different colors and sizes.
2.        23 years' manufacturing experience.
3.        Six production lines to make sure of on time delivery, products will be shipped out within 15 days after deposit or L/C.
4.        Rider Glass ensures that you will receive the exact high quality glass you want at the most competitive prices.
5.        All the products are manufactured according to ISO9001 and AUSTRALIA AS/NZS 2208 and Issued by SAI Global AMK 40195 certificate, to make sure of perfect quality.
6.        Dockside warehousing in 3 of China’s top 5 container ports ensures convenient loading and rapid delivery of Rider Glass.
7.        Wide assortment of colors and customization options make it even easier to make all your glass purchasing decisions from one supplier. 
8.        We give each customer personalized, professional, and dedicated service.
9.        From order to delivery to after sales service, our devoted team of experienced sales professionals is always available to give prompt replies and service.
10.     No matter the requirement, at Rider Glass we are always at your service.

FAQ
 
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the glass depends on your requirements.
 
Q.  What the your glass package ? Are they safe ?
Answer :Seaworthy strong  plywood crates with paper interleave  . The crates will be very strong and every loading worker has 23 years packed, loading and  fixation crates with container experience. And we send the loading pictures for you after we loading .
 
Q. What is your payment term ?
Answer : Our payment term is T/T 30% in advance ,70% after get the copy of B/L .
If your glass quantity is less, we want to TT 100% . You can payment By T/T, L/C at sight.
 
Q. Can you supply a free samples ?
Answer: yes, if you want us to provide big size sample according to your requirements, you should pay the cost of production.