Product Details

Top-Quality Korean Eco-Friendly Compressed Air Filter

Product Description

Why Compressed Air Filter ?

Purification of air we breathe carries contaminants. Airborne particles, water, microbes, and chemical gases enter compressors. At a state these contaminants become concentrated and mores destructive.

In the compressed air system, hard particles assault equipment and piping.

The result is damage to the system and more particles generated. Since the compressed air is heated during the compression aftercooler is then used to remove the heat of compression.

During this stage a significant quantity of liquid at compressor delivering 100 scfm (2.8m³/ hr) at 100 psig (7 bar) and 100'F (38'C) can product 18 gallons (68 liters) of water a day. These liquids, if not removed, will cause erosion, damage to pneumatic equipment and instruments.

Filtering and drying processes remove particles, moisture, microbes, and chemicals from compressed air. Clean, dry air protects the air System, reduces maintenance costs and increases finished products yields.


Painting	Filter Element

How it Works ?

Particles traveling in a fluid have a mass and velocity. The fluid will follow the path of least resistance. Some particles will impact onto the filter medium and be caught due to their inertia driving them into the filter.

Extremely small particles will bounce around randomly in a gas stream as they strike liquid or gas molecules.

The random path of the particles increases the chance it will strike the compressed air filter and be captured.

If the particle is larger than the pore of the filter, it is retained. The pores can be infinitely smaller, and there can be layer after layer of media common form of retention in both gas and liquid service. Our filters maximize their direct interception with torturous flow paths, which increase the filter's retention capability.

Features & Benefits

Filter assembly includes filter element

Filter assembly includes automatic drain trap

Filter assembly includes differential pressure gauge (upon request)

Stainless Steel bolt filter element (upon request)

Particle removable rate : 40 ~ 0.01 micron

Variable flow rate : 35-38,936 scfm (1-1,103 m³/min.)

Available connection sizes : 1/4” to 3” NPT threaded

Long-term protection against corrosion with epoxy interior coating

Long-term protection against corrosion with power coated painting

Easy replacement of filter element

Easy to check float defects and capability of condensate removal with
easily removable vent cock

High
pressure filter upon request

Filtering and drying processes removes particles, moisture, microbes, and chemicals from compressed air. Clean, dry air protects the air system, reduce maintenance costs and increases finished products yields.

Features & Benefits

Filter assembly includes filter element
Filter assembly includes automatic drain trap
Filter assembly includes differential pressure gauge (upon request)
Stainless Steel bolt filter element (upon request)
Particle removable rate : 40 ~ 0.01 micron
Variable flow rate : 35-38,936 scfm (1-1,103 m³/min.)
Available connection sizes : 1/4” to 3” NPT threaded
Long-term protection against corrosion with epoxy interior coating
Long-term protection against corrosion with power coated painting
Easy replacement of filter element
Easy to check float defects and capability of condensate removal with easily removable vent cock

High pressure filter upon request

Product Detail Image & Description

1. Pressure Gauge

- It helps us to recognize the contamination of filter element.

2. Element

- Various filter elements are put into filter housing.

- 40um, 5um, 1ppm, 0.1/0.01/0.003ppm.

- Remove particles, moisture, microbes and chemicals from compressed air.

3. Drain Valve

- No-loss drain valve / Timer controlled drain valve.

- Discharging condensate.

4. Powder Coating

- The coating is applied electrostatically and is then cured under heat to allow it to flow and form a "skin"

- The power coating can produce much thicker coatings than conventional liquid Applied to HYF-15A-50A.

5. Drain Float

- Float type and discharging the condensate.

- Applied to HYF-15A-20A.

6. Filter Leg

- Support filter body.

- HYF-125A and abve.

40um, 5um Element

- Higher filtering effciency than other brands because its crystalloid is very fine

Equalized Granularity

- Filter element, densely equalized granularity, approved as a food wrapping material by FDA.

Removing Oil Vapor

- Our 5um filter element can remove oil vapor too.

Cyclone Effect

- The particles and heavy moisture can be effectively separated by cyclone effect of upper module plate.

- Anti-vibration guide bar at the bottom prevents condensate from being carried over.

Multilayer Filter Element

- Particles and oil vapor can be removed simultaneously by multilayer filter element.

Vent Cock

- Easy to release internal pressure.

Easy to check float and to remove condensate.

- Applied to HYF-15A~20A models

Product Specification

Note

- Operating Pressure : 7bar

- Design Pressure : 9.7bar

- Working Temperature : 40 / 5um --------------------Max.65'C

1 / 0.1 / 0.01 / 0.01 F----Max.54'C

- Stainless steel marterial filter is also available upon request.

- Filter leg is standard from HYF-125A and above

- Our filter element model name is HYE

ex) HYF-40-15A -> HYE-40-15A

- HYE-a-50A is commonly used for HYF-50A filters and above.

All specification can be changed to improve the quality without notice.

Dimension

Certifications

<ASME Patent>

<ISO9001>

<ISO14001>