1.Aluminum metalized polypropylene film.
2.Aluminum-Zinc alloy metalized polypropylene film.
3.Aluminum-Zinc alloy metalized polypropylene film with heavy edge.

4.Aluminum metalized polyester film.
5.Aluminum-Zinc alloy metalized polyester film.
6.Aluminum-Zinc alloy metalized polyester film with heavy edge.

B) Specification                                                                                                                                            

Cores

Material:Plastic 

Width:Film Slit Width +/-0.2mm

Inner Diameter:75mm+1.0mm/-0.5mm

Roll Outer Diameter

For slit widths 4.0mm up:155+6/-15mm 

For slit widths 10.0mm up:180+8/-18mm

For slit widths 25.0mm up:240+10/-20mm 

For slit widths 50.0mm up:320+10/-40mm

ROLLS

Film is wound on solid cores,with the metallized layer inside. 

Rolls are wound up to the specific outer diameter.

The loose end of film is held in place by a closing sticker. 

Rolls are always packed in pairs. 

There is a plastic foam between te rolls to protect the electrode side.