Product Details

Specifications

Real-time monitoring carbon dioxide (CO2) measurements during 0 to 20,000ppm range
Optional real-time monitoring temp.,RH%

wholesale CO2 Controller with free shipping

CO2 Controller Description:

The monitor/controlleris special design to monitor and alarm CO₂ level, also provides upto one 0~10VDC output and one on/off relay output to control a fan or a CO₂generator.

An data logger is designed inside, which canrecord CO₂ measurements more than 115 days and can be saved the datavia a USB disk.

Thememorial CO₂ monitor/controller not only very easily to be used as aCO₂ monitor and controller, but also as a recorder of themeasurements.

F2000IAQ-CO₂-31XXUseries Application in schools, kindergartens, officebuildings, greenhouses and so on.

CO2 Controller Features

Real-time monitoringcarbon dioxide (CO₂) measurements during 0ppm to 20,000ppm range

Optional real-timemonitoring temperaturefrom -20°Cto 60°C and relative humidity from 0 to 100%RH

Non-dispersiveinfrared (NDIR) CO₂ sensor withself calibration, 15 years lifetime

The 3-LED indicatorlights indicate three CO₂ measured ranges

LED lights brightnessadjustable

Provide1X0~10VDC output for alternative linear

CO₂measurement and PID control output

Provide1X On/Off dry contact output to control alternative a ventilator and a CO₂generator

An internal data logger is used torecord CO₂measurementsas well as optional temperature and RH% measurements.

With super large capabilitymemorizer, it can save data of up to 115 days

Provide the software to preset thesampling time, read and record CO2/temperature&RH levels on PC

Post the data from the internalmemorizer by any USB disk, and copy the data to a PC

¨ Specifications

Gas detected	Carbon Dioxide (CO₂)
Sensing element	Non-Depressive Infrared Detector (NDIR)
Temperature sensor	NTC
Temperature correction	Self compensation
CO₂ NDIR life	15 years
Consumption	3.5W/ Max, 2.5W/ Average
Accuracy@25°C(77°F)	±40ppm + 3% of reading
Stability	<2% of FS over life of sensor (15 yr typical)
Warm up time	2 hours (first time) 2 minutes (operation)
CO₂ measuring range	0~2000ppm, which is default value 0~(1,000~20,000)ppm, programmable selection
CO₂ setting & Display resolution	1ppm
Temperature measuring range	0~50°C(32~122°F)
Temperature setting range	5~45°C(41~113°F)
Option: 1X dry contact output	Rated currency for contact point: 3A 220VAC/30VDC, resistance load
Option: RS485 communication interface	9600/14400/19200(default)/28800/38400bps rates selectable by program,15KV protection for static, independent address setting
Operation condition	0~50°C (32~122°F), 0~95%RH without condensing
Power supply	220VAC/110VAC or 24VAC 50/60HZ±10%
Weight	380g
Dimensions	130mm×90mm×40mm
Connections Interface	Locate in interface of connection
Installment standard	65mm×65mm or 2”×4” wire box
Wiring standard	Wire section area<1.5mm²
Approval Standard	CE-Approval
Programming and selection	DIP switches inside and external push-buttons

Shipping Information

India. Ctn. Dim	135mm×95mm×55mm
Master Ctn. Qty	40
Master Ctn. Dim	44cm(L)×32cm(W)×32cm(H)
Master Ctn. Wt.	15 KG

Model Guide

Gas Type
CO₂	Carbon Dioxide

Code		Model
3	1	Standard model (CO₂&temperature detection)
5	1	CO₂&temperature detection with RS-485 network communication

Code	Analog output
0	No analog output
1	1X 0~10V output

Code	Dry contact output
0	No dry contact output
1	1X dry contact output

Code	Humidity option
RH	Relative humidity detection

Code	Power supply
A	220/240VAC
B	100/120VAC
C	24VAC

F2000IAQ

CO₂

—

Note: X2 + X3 ≤1

Example: F2000IAQ-CO₂-3100 indicates that it is a CO₂ indicator with temperature detection.