NDIR CO2 Controller, buy CO2 Monitor on China Suppliers Mobile

Product Details

Specifications

F2000IAQ-CO2 monitor/controller is used to monitoring and control room CO2 level, as well as room temperature and humidity.

Gas detected	Carbon Dioxide (CO₂)
Sensing element	Non-Dispersive Infrared Detector (NDIR)
Temperature sensor	NTC
Humidity sensor	HS series capacitive sensor
Temperature dependence	0.2% FS/°C
Temperature correction	Self compensation
Power supply	24VAC/VDC, or 100~240VAC, 60HZ, selectable with the order
Consumption	3.5 W max. ; 2.5 W avg.
Accuracy@25°C(77°F)	±30ppm + 3% of reading
Stability	<2% of FS over life of sensor (15 yr typical)
Calibration interval	ABC Logic Self Calibration Algorithm
Non linearity	<1% of FS
Pressure dependence	0.13% of reading per mm Hg
Altitude calibration	Programmable from 0-9,900m in 100m increments
Response Time	<2 minutes for 90% step change
Signal update	Every 2 seconds
Warm up time	2 hours (first time) 2 minutes (operation)
CO₂ measuring range	0~2,000ppm (default) 0~20,000ppm, programmable selection 0~50,000ppm
CO₂ setting & Display resolution	1ppm
Temperature measuring/ setting range	0~50°C(32~122°F)/ 5~45°C(41~113°F)


Humidity measuring/setting range	0~99%RH/ 5~95%RH
Analog output	0~10VDC linearized output or PID control output, selectable by end users
Output resolution	10Bit
Relay output	One or two dry contact outputs with programmable selection to control CO₂, temperature, humidity Rated switching current: 3A(220VAC/30VDC), resistance load
Communication interface	RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64
Flow rates	Diffusion version 80 ~ 120 cc/min Flow through version 40~50cc/min
Operation conditions	0~50°C(32~122°F); 0~95%RH,
Storage conditions	10~50°C(50~122°F)/ 20~60%RH non condensing
NDIR life	15 years
Weight	360g
Dimensions	130mm×90mm×40mm
Installment standard	65mm×65mm or 2”×4”wire box
Interface connections	Maxi. 9 terminals
Wiring standard	wire section area<1.5mm²
Approval Standard	CE-Approval
Programming and selection	Via internal jumpers and push-buttons on the panel

1) Application in all ventilation systems, or public places

2) Wall mounting type

3) LCD display CO₂ level and temperature, also humidity (optional)

4) Specially provide the altitude calibration

5) Providing strong control outputs with up to three 0~10V analog outputs and three relay dry-contact outputs

6) The analog output with two alternatives: PID control output or linearized over full range output

7) Different control mode for delays selected by users applications such as ventilation systems or greenhouses

8) Locale adjustable range of CO₂: 0~2,000ppm/0~5,000ppm/20,000ppm/ 0~50,000ppm;

adjustable range of temperature: 5~45adjustable range of humidity595%RH

9) RS-485 communication interface optional, 15KV antistatic protection, independent base address setting

10) CE-Approval