Product Details

CE&Rohs Approved water leakage detection system/water leakage detector/water overflow detection alarm

Product Description

Products Picture of water overflow detection alarm

Products Specification of water overflow detection alarm

Sensor cables maximum length	500m
Accuracy	100%
Power supply	12VDC,3W
compatibility	A-LC1B sensor cable and the same type tow
compatibility	line sensing cables
Relay contacts	AC125V,0.5A,DC24V,1A.To often open,
Relay contacts	closed can be chosen
Environmental rating	Storage temperature:-40 oC ~60 oC(0 oF~140oF)
	Operating temperature:-20oC~50 oC(32 oF~122oF)
	Operating humidity:5%~95%(No condensation)
Serial interface	Network configuration: RS-485 communication
	mode,baud rate can be chosen,optional address
	for 0 to 247,the factory default baud is
	9600,and addresss is 0
	Programming agreement: MODBUS RTU

A-LC1A linetype water overflow detection alarm can monitor the dual-core leakage sensor cable up to 500 meters . It can be use with the sensor cable , and also can be use with the other sensor probes . Once the sensor contacted the water , A-LC1A will produce sound and light alarm ,and drive relay .The A-LC1A linetype water overflow detection alarm using modbus RTU protocol controller programming ,and monitoring system to

facilitate integration

A-LC1A either as stand-alone leak detection alarm can also be integrated with other network hosts

collected using

It can be used in the base stations ,warehouses ,libraries ,museums ,parking lots and industrial sites and other important places of real-time leak detection ,and more can be used for air-handling units ,chillers ,liquid containers ,pump tank and other equipment needed to monitor leakage

Features

Practical and reliable twisted pair serial RS-485 communication test ,as far as communication distance up to 1200 meters ,the standard industrial modbus protocol.
12V DC power supply , the distinction between positive and negative access.
Sensor sensitivity adjustable.
A variety of communication baud rate and set the module address software and communication baud rate ,without the use of switch .
Relay output in the form NC coexist ,are free to choose .
Good anti-static ,anti-surge technology to ensure reliable operation of the product
Convenient 35MM DIN rail mounting
Dimensions:55*115*36mm.

Install The A-LC1A

♦ Note:To avoid damage to the A-LC1A,store the unit int it's packaging until ready to install.

♦ Selecting the mountion position

Chose a location where the module will be protected from the elements,temperature extremes or heavy vibration.The A-LC1A is designed to be snapped onto standard 35 mm DIN rail. Existing electrical or instrumentation cabinets with spare rail space make good mounting locations. It is also possible to install a small section of DIN rail directly on a wall or cabinet surface and monut the A-LC1A in any location as long as it does not create a tripping hazard or expose the A-LC1A to impact damage. The A-LC1A should be monuted within 1200m wire run from the control system host.Contact the factory for methods to increase the wire run distance beyond 1200m.

♦ Important

The A-LC1A is an electronic unit.Take the following precautions to avoid damage to electronic components:

• Handle with care and avoid mechanical shock and impact.

• Keep dry.

• Avoid exposure to static electricity by touching a nearby piece of grounded equipment or water pipe prior to handling the A-LC1A.

• Avoid contact with metal filings ,grease,pipe dope and other contaminants.

♦ Mounting the A-LC1A module

• Secure a sufficient length of DIN rail to the desired mounting surface,or locate

and existing DIN rail with sufficient space to install the A-LC1A.

• Remove the A-LLM1 form it's packaging and snap onto the DIN rail with the release

Tab towards the bottom.

The monitoring system accessories of water overflow detection alarm

SERIAL NUMBER	MODEL	NAME
1	A-LC1A	The leak not positioning controller
2	A-LC1B	Leak not positioning sensor cable
4	A-LLW68	connection wire
5	A-LLW96	Fixed glue stick a clip

"Quality is Our Culture!"

Click the picture or the title to know more details.

Hot sale!! Location water leak detector/Addressable water leak detector

Localizable detector

Relay & RS485 Output

with built-in alarm

Enable Software Management

Factory Price Non-Locating 2Pin water leak detection cable/water leak sensor/water sensing cable

Multi-Zones water leak detection/Real time detection alarm

Monitoring 4 different places

Aluminium Oxide Made Cover

Unique & Durable Design

Relay & RS485 Output

with built-in alarm

Enable Software Management

About Us

Shenzhen An Ying Technology Co.,Ltd was established in 2009.Our company has strong science and technology strength.Otherwise ,there are many high quality researching talents who own the master's and bachelor's degree.We have established the LED department and machine room monitoring departmen under our common efforts.We specialize in researching ,producing and processing LED lighting, leak detector,machine room monitoring device.The head office is located in Shenzhen

Certification

Our Services

The requirement of technology : The quality of the products? should comply with the National Export Standards .We shall take the samples which the two sides confirmed as a standard
The products of Party A should be completed with the guarantee of the quality and quantity,according to the quality requirement of the same products in their company.If in the case of normal use,all the shipping cost of Party A for the guarantee of returns and replacement of the defective products should be shared commitment by two sides.But if the damage of the products is for the force majeure factors or not be cause by Party B,and if the products is out of warrenty,Party B should repair it with only charging the cost of production,the cost of material and of freight.Party B also should have the track service to the lifetime of the products.Specific rules should take the contract as the standard.

If you want any details,please don't hesitate to contact us!

Packaging & Shipping

Packaging , Payment & Shippng

Packaging: Naked or To be effected by the Buyer
Payment: We accept Alipay, West Union, TT. ESCROW PAYPAL L/C
Shipping: FED DHL UPS TNT EMS Ocean shipping Air transport

Market

There is complete and scientific quality management system in Shenzhen An Ying Technoloey Co.,Ltd . The honesty, the strength and the high quality of the products has been recommended by the industy and the customers in the world.

Your presence and guidance ,or business negotiation are warmly welcomed