Plastic PVC Grid tube for conduit
USD $0.1 - $50 /Meter
Min.Order:2000 Meters
Hebei Kunzan Plastic Product Co., Ltd.
Plastic PVC Grid tube for conduit
Grid tube, PVC grid tube, plastic tube for conduit
Grid tube, PVC grid tube, plastic tube for conduit
Product Introduction: UPVC pipes, used in water supply pipe, drain, irrigation
OD: 50mm-200mm, Standard: ASTM,BS,GB/T, We can offer different specifications and size
Appearance:
1.Light weight, easy to load and unload:
UPVC pipe is light, convenient to handle loading unloading and installing. May save much labor.
2.Good chemicals and drugs resistance:
UPVC pipe has its excellent resistance to the erosion caused by acids and alkaline, a great help to the chemical industries.
3.Small resistance to fluidity:
The smooth surface of UPVC pipe reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller caliber pipe can be used.
4.Strong mechanical strength:
Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5.Good electrical insulation:
UPVC pipe has excellent insulation characters. It can be served as conduits and pipes in construction for cable and wire.
6.Water unaffected:
The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7.Simple installation:
Very easy to connect, thus much time and labor cost may be saved.
Application:
Grid tube, PVC grid tube, plastic tube for conduit
Structure Engineering
Pipes for Chemical Industrial use
Water supply system
Special Purpose Pipes for Agriculture Irrigation
Soil, Waste and Vent Pipes
Wire Protection System
Freeway engineering
Golf sourse engineering
Advantages
Grid tube, PVC grid tube, plastic tube for conduit
1,Corrosion resistance, Good insulation. 2, Porous separate clearly, easy to thread. 3, Holes dense arrangement, raise hole location’s operating factor. 4, One pipe with many holes, ease of installation can reduce installation costs. 5, High strength Longevity.
Dimension (G: Grid tube, A:Plastic Alloy tube)
Grid tube, PVC grid tube, plastic tube for conduit
SPC. Width mm /holes | MOQ M | Thickness mm | |
General Standard | GB. Standard | ||
G162/4 | 2200 | 3.2 |
|
G162/9 | 2200 | 3.0 |
|
G107/1 | 5500 | 2.5 | 3.5 |
G107/4 | 5500 | 2.2 | 3.2 |
G107/9 | 5500 | 2.0 | 2.2 |
A107/1 | 5500 | 3.0 | 3.5 |
A107/4 | 5500 | 2.3 | 3.2 |
A107/9 | 5500 | 2.0 | 2.2 |
G92/1 | 7500 |
| 3.0 |
G92/4 | 7500 | 2.0 |
|
G92/9 | 7500 | 2.0 |
|
A92/1 | 7500 |
| 3.0 |
G72/4 | 12000 | 2.0 |
|
G62/1 | 32000 | 2.5 |
|
A62/1 | 32000 |
| 3.0 |
G107x72/6 | 8300 | 2.0 |
|
G92x62/6 | 11000 | 2.0 |
|
G150x150/1 | 4500 | 2.5 |
|
Physical Properties
properties | Typical Value |
Tensile Yield Strength (MPa) | ≥30 |
Longitudinal retraction rate(%) | ≤5.0 |
Vicat softening temperature ( °C) | ≥75 |
Impact Resistant(0°C) | 9/10Pass |
Outside & inside rate of loading | ≥1.0 |
Coefficient Of Static Friction | ≤0.35 |
Grid tube, PVC grid tube, plastic tube for conduit
Trade process