Product Details

High quality American-style Oil Immersed Electrical Transformer 10Kv

I. Introduction:

1.Iron core pole is rolled by HV & LV, which maked the winding solid.

2.Corrugated panel radiator, when temperature change, it could replace the oil conservator.

3.Iron core structure is made of 3 phase 3 pole inside and outside roll with high machine strength.

4.A fully enclosed structure transformer tank, fuel tank along with the boxes available Bolt or welded, transformer oil is not in contact with air to extend the service life.

II.Working condition:

1.Altitude cannot exceed: 1000m

2.Lowest outdoor temperature: -25°C

3.Highest ambient temperature: +40°C

4.Highest daily average temperature: +30°C

5.Highest annual average temperature: +20°C

Advantage of High quality American-style Oil Immersed Electrical Transformer 10Kv

1	Power transformer 10kv and 35kv low-loss series
2	low loss, low noise, high reliability
3	Iron core is made of cold-rolled silicon-steel
4	Have good ability withstand short-circuit
5	The oil tank is bell type with the structure of full folding plate type,
6	Having an excellent exterior and easy for maintenance
7	Adopting capsule-type oil container, it can reduce oil aging to the lowest degree
8	Power loss: no-load loss is 30% lower than that of IEC standard
9	Reliability: All in-service product have no damages or oil leakage occurred