Product Details

Product Description

Hydroponic AIR-COOLED reflectors

Hydroponic agriculture Greenhouse Lighting Fixture

1) size: 37"Lx27.6"Wx"10.2H (dimensions include flanges)

2) Built-in 8" flange
3) Body steel,with white powder coating.

4) Four sides highest quality reflective aluminum

5) Flip down Tempered glass,with gasket

6) 4.0M power code H05VV-F 3x1.0mm2 With Male IEC Plug

7) E40,5KV,600V,1500W,LAMP HOLDER

8) Use retracting and releasing cable when replace bulb

9) Accept:Sodium 400.600.1000w

Halide 400.600.1000w

10) Two hangers included.

11)Without bulb.

No acoustic resonance, more than 8% grow light compared to

traditional lamps

Light maintenance after 5000hrs > 95%

More details of

Hydroponic agriculture

Hydroponicautomatic system

Hydroponic grow light reflectors

Related products:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Works with all wattage MH and HPS lamps.

- Completely assembled
- Lightweight- Durable
- Works with MH and HPS
- Works with 250w through 1000w
- Measures 24"Lx21"Wx8"H(610L*530W*200H mm include flanges)

- Sealed air-tight design
- 6” Flange for duct connecting
- Power coated steel
- Lamp not included

Specifications

Hydroponic grow light reflectors/

horticultural MH / HPS reflectors

--Air-Cooled with a flange to attach your ducting directly to the reflector.

--Top quality German aluminum interior for excellent output and uniformity.

--With powder coated steel to ensure a long life.

--Connected by ducting to a sufficient fan this reflector will produce optimum results with cool and efficient operation.

--Completely sealed. Pre-installed lamp socket, 15' cord, and 2 hanging clips included.

--Measures 22"Lx15"Wx7.5"H(560L*380W*190H mm include flanges)

*************************************************************************

Restrive Bend above lamp provide optimum lighting performance

Hinged glass

Fully sealed under glass for best heat isolation

Broad light spread allows close placement to plants for maximum light delivery in low-clearance locations

ETL certificated

Hour Timer:

Safe and easy to use Grow Light Reflector Grow Light Reflector
Ensure timer is disconnected from power supply.
Press down the segment pushbuttons according to how long you require the system to stay on.
Each segment is 15 minutes. Grow Light Reflector Grow Light Reflector
Turn the timer dial until the black pointer is set to the present time.
Plug in your appliance to the timer and then the timer to the power supply socket and switch the socket on.
Timer and your appliance go working till the stop time.
The timer can be overridden by moving the red switch on the side.
Timer Power: Max Wattage 3500W; Max Current 16A/220-240V/60Hz