Model:LYD300

2. Technical Parameters
2.1 Working temperature:-20-60 ℃
2.2 Supply voltage:DALI whole power

2.3 Input signal:body induction, photo induction signal
2.4 Output signal:standard DALI signal
2.5 Input current:≤9mA
2.6 Gross weight:122.5g
2.7 Net weight:78.5g
2.8 Packing sizes:L106 * W106 * H52mm
Commercial Lighting Control System Product Specification Page 8 of 30
2.9 Check range of installing at 3-4 m high: 5-8 m
2.10 Setting range of illumination threshold:10-650lx

3. Dimensions

4. Instructions 

4.1 choosing of body, light sense function: it can open and close the function of body sense and light sense, can close all to make sensor invalid.
4.2 output control setting : set output control single device or group or radio control of
sensor
4.3 output mode control:set the output control mode of sensor to max, min, or automatic
4.4 set value of light sense threshold:10-650lx;
4.5 set duration of timing:30s-60min;
4.6 Sensor indicator: the sensor power on / restart, receiving the control instruction,effective sensor output, the sensor above indicator flashes; sensors standby, non-inductive, light off;
4.7 Reset key: Press the key 5S, the sensor parameters can restore the factory settings,and restart the sensor;
Note: set the factory default : body sense function is open, light sense function is open, output the address of control device is radio, control mode is max, illumination threshold is 5001x,duration of delayed time is 2.5min.

5. Using instruction

5.1 When set up the light induction control mode: when the outside light is less than the
Commercial Lighting Control System Product Specification Page 9 of 30
setting threshold , the control group of lamps will output the max and min value which set
or it will control automatically(The sensor will increase and reduce the output of
controlled lamp according to the current environment light value it measured ). When the
outside light continuous is greater than setting threshold and closed time over the set
delay value, the control group of lamps will go out.

5.2 When set up the human body induction control mode: when induction for moving body, it will light up the control group of lamps and lanterns, when there is no sense to the
human body movement, reaches the set delay time will control the lamps and lanterns is
put out.
5.3 When set up the human body induction and light induction control mode: when the
outside light is greater than the set threshold illumination, human body induction is
invalid; when the light is less than the set threshold illumination, human body induction is
effective.
Note: these three mode can be repeated triggered.

 2,All of our items have  years quality warranty. Offering the customer best services prior or after sale

 3,Samples shippment can be settled 1-3 days after ordering and payment.

 4, OEM welcomed!!

1.We are located in Baoan district, Shenzhen City,China,closed to the shenzhen airport,convenient for the visit !

2. Years  menber of Alibaba

3. Products are approved with CE,RoHs,Fcc,SAA,UL ,ETL certificate.

4.Every year we attend the  Guangzhou optical sub Exhibition 

We adheres to "convenient, efficient, intelligent" which guarentees products quality and customer service. Intelligent integrated into life, make life more convenient.