Product Details

vinyl cutting blade and holder

1.Technical data of the plotter blades in the overview:

tungsten carbide plotter blades Material: sintered tungsten carbide, special format for plotter blade use.

tungsten carbide plotter blades Application: Applied to plotter cutter machines as a replaceable part to cut material vinyl, plastic, rubber, glass, reflective film and common metal.

tungsten carbide plotter blades Standard: We offer standard blades for brands Roland, Mimaki, Graphtec, ioline, Summa, Mutoh, Annagraphtec and specially blades for Summa T, Craft Robo series plotters. Common degrees are 30°,45°,60°.

OEM service offered. Any special requirement on offset and reflective degree can be met. Any blades of brands not listed above can be customed by sample, detail drawings or detail description of specification.

2.Grade of the carbide for plotter blade

Grade	Equal to ISO Category Number	Performance			uses
		Density	Bend Strength	Hardness
		G/Cm3	N/mm2	HRA
YG3	K01	14.9-15.3	≥1180	≥90.5	sand-blasting nozzlesQualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting nozzles.
YG3X	K01	15.1-15.4	≥1300	≥91.5
YG6X	K10	14.8-15.1	≥1560	≥91.0	Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A	K10	14.7-15.1	≥1580	≥91.0
YG6	K20	14.7-15.1	≥1670	≥89.5	Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8	K20-K30	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.
YT15	P10	11.1-11.6	≥1180	≥91.0	Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel.