SAPI inserts, stand-alone plates
USD $25 - $30 /Kilogram
Min.Order:50 Kilograms
Zhuzhou Better Tungsten Carbide Co., Limited
small arms protection inserts/stand-alone plates/ceramic rifle plates
Advantages of Ceramic Bulletproof Plate for hard amor vest
Ceramic is brittle, which makes it sensitive to shock. So on its own it offers very little ballistic protection. However, in composite systems such as ceramic-polymer composites ceramic has largely replaced the steels previously used for personnel and vehicle protection. One main reason for this is its up to 50% weight advantage. The protection offered by ceramic composite armor is based on a different mechanism. When a projectile impacts the ceramic surface the tip deforms, which enlarges the cross section of the impact. The projectile micronizes when it penetrates the ceramic.
Silicon Carbide Bulletproof plate, bulletproof ceramic plates features:
Silicon Carbide Plate has superior characteristic such as wear resistance, corrosion resistance,
high temperature tolerance, oxidation resistance, perfect efficiency of sealing, long time service life.
Performane of the ceramic bulletproof plate:
Dimensions: 245 x 295 x 6mm
Weight: 2.4Kg
Protection Level: NIJ level III
|
Comparison of Silicon carbide and boron carbide peformance:
Item | SiC | B4C |
Density | 3.1g/cm3 | 2.4-2.65g/cm3 |
Hardness | HV2750 | HV3300 |
Bending strength | 380 MPa | 400-650 MPa |
Production quality control system
FAQ:
What ballistic protection level should I order?
NIJ Level II is a good balance between comfort, concealability and protection from blunt trauma. NIJ Level IIIA is worn by many police officers and law enforcement agents. This is the most widely utilized type of vest in the industry for safety, cost and the ability to be worn under another garment.
Level III and IV tactical vests require ballistic inserts and are thus heavier and also a bit more expensive. The plates will provide better blunt trauma protection and preserve the wearer's ability to return fire after taking a hit. These vests are highly desirable when facing threats such as machine guns and high velocity rounds. Refer to the ballistic test chart for more detailed information on the protection specifications.
What about rifle and submachine gun protection?
Rifles and submachine guns are capable of delivering higher velocity rounds that render soft armor ineffective. Therefore we advise the use of hard armor inserts which will upgrade a level IIIA vest to a level III or IV protection in the front and back. Soft body armor vests only provide pistol and shotgun protection.
Any further questions about the bulletproof plates just contact Zoe freely.
Choose us, you'll win!