10000lbs 12000lbs 12V 24V air compressor electric winch
USD $349 - $398 /Set
Min.Order:1 Set
Shandong Jndo Hoisting Equipment Co., Ltd.
10000lbs 12000lbs 12V 24V air compressor electric winch
Product Description
Whether you're winching and airing up while off-roading,inflating a raft or air mattress,
or running a nail gun or impact wrench,this is the new way to get it done.
Theair compressor electric winch enables both powerful pulling capacity and fast gas-charging
functions which can be your preference. You won’t be frustrated by so large amount of off-road
outfit loaded in your vehicle. This product includes SQ10000 and SQ12000 models. Both are
user-friendly designed, and are equipped with the wired switch, air pressure gauge.
Competitive Advantages
1. The DC series motor with bidirectional electromagnetic braking ensures the winch can be
installed in any direction.
2. The patented design of gearbox makes the clutch system operate smoothly and safely.
3. The copper conductive elements ensure sensitive electric conduction and reliable electrical
transmission.
4. The application of split-type roller fairlead minimizes the resistance of fairlead during rope
guiding.
5. The air compressor contains the automatic shut-off devise against overhigh pressure, to
protect the user as well as the machine.
6. According to the motor voltage, the air compressor offers varied capacity. To illustrate, when
the motor voltage is 12V and 24V, the air compressor capacity is 72L/min and 95L/min, respe-
ctively.
Recommended Optional Accessories
1. Tree strap.
2. Recovery board.
3. Quick connector.
4. Wireless remote control.
JN-SQ10000
As its name indicates, the SQ10000 series product is a combination of a winch and an air
compressor.Under complex outdoor situations, we can’t guarantee the safety of ourselves and
our vehicles all the time.
There are a lot of factors need to be taken into consideration while you are driving off-road
vehicles under bad environmental conditions. For instance, you need a device for self-help in
case of your vehicle stuck in a wetland, and you also have to make sure your vehicle tire is fully
inflated so as to ensure safety.
Thus, our 10000lb winch with air compressor is the ideal solution to satisfy both your self-help
and tire inflation requirements in the field.
SQ10000 model is equipped with a high-power DC series motor. The pulling capacity ranges
within 4.5 tons, suitable for most off-road vehicles. Comparing with other similar products, the
air compressor shares the same motor with the winch in SQ series, which saves the battery
energy and prolongs the service life of the product.
Competitive Advantages
1. The winch can be installed in every direction due to the DC series wound motor with
bi-directional electromagnetic brake system.
2. Roller fairlead is split-designed, which enable the fast transmission.
3. The design of gearbox is patented, making the clutch operate smoothly and safely.
4. The air compressor is equipped with automatic shut-off device against the over-high pressure
to protect the machine and the users.
5. The air compressor offers varied capacity according to different voltage. That is, when the
motor voltage is 12V and 24V, the air compressor capacity will be 72L/min and 95L/min,
respectively.
6. The copper-made power elements ensure sensitive conduction and reliable electrical transmission.
Specifications
Rated Pulling Capacity | Single line:10000lbs(4356kg) |
Motor | Series wound,5.5hp/4.0kW(12V),3.6hp/2.68kW(24V) |
Gear Train | 3 stage planetary |
Gear Reduction Ratio | 148.2:1 |
Clutch | Sliding ring gear |
Braking Action | Automatic drum brake |
Drum Size | Φ64×223.5mm |
Cable | Φ21/64"×94'(Φ8.3mm×28m) |
Fairlead | 4-way roller fairlead |
Remote Switch | Optional |
Battery | Recommended:minimum 650CCA |
Battery Cable | 2 gauge,72"(1.83m) |
Coating | Dark grey powder coat |
Overall Dimensions | 21.1"×6.3"×8.6"(537mm×160mm×218mm) |
Mounting Bolt Pattern | 254mm×114.3mm |
Gross Weight | 42kg |
Packing Size | 570mm×190mm×345mm,1PC/CTN |
Specifications of Air Compressor
Maximum Output | 2.55CFM(72LPM) |
Air Filter | Included |
Noise | 70dB |
Auto Pressure Cut-off Switch | Included |
Airflow | 72lpm(12V),95lpm(24V) |
Voltage | 12V/24V |
Max Amperage Draw | ≥30A(12V),≥22A(24V) |
Optimal Operating Temperature | -40℃~+60℃ |
Max Continuous Cycle | -20% |
Max Pressure | 150PSI |
JN-SQ12000
The SQ12000 winch with air compressor combines the functions of air compressor and winch,
and enables a tension up to 5.4t.
You need to save yourself as well as consider the safety of the tire under complex situation. Our
product will meet your need absolutely for both your self-rescue and the tire inflation requirement.
Equipped with a high-power DC series motor, SQ12000 model is suitable for most off-road
vehicles.
In addition to the powerful pulling capacity, the air compressor and winch shares the same motor,
in order to save more energy to prolong the service life.
Competitive Advantages
1. The copper power elements keep a sensitive electric conductivity and transmission.
2. The air compressor with automatic shut-off device protects the winch againstoverhigh pressure
as well as the users.
3. The winch can be installed in every direction due to the DC series wound motor with
bi-directional electromagnetic brake system.
4. The roller fairlead is split, reducing the resistance of fairlead during rope guiding.
5. The gearbox design is patented, which enable the clutch operate safely and smoothly.
6. The air compressor offers various capacities. When the motor voltage is 12V, the capacity of air
compressor is 72L/min, and when voltage is 24V, the capacity is 95L/min.
Specifications
Rated Pulling Capacity | Single line:12000lbs(5443kg) |
Motor | Series wound,6.6hp/4.8kW(12V),4.0hp/3.0kW(24V) |
Gear Train | 3 stage planetary |
Gear Reduction Ratio | 187.2:1 |
Clutch | Sliding ring gear |
Braking Action | Automatic drum brake |
Drum Size | Φ64×223.5mm |
Cable | Φ3/8"×94'(Φ9.1mm×28m) |
Fairlead | 4-way roller fairlead |
Remote Switch | Optional |
Battery | Recommended:minimum 650CCA |
Battery Cable | 2 gauge,72"(1.83m) |
Coating | Dark grey powder coat |
Overall Dimensions | 21.1"×6.3"×8.6"(537mm×160mm×218mm) |
Mounting Bolt Pattern | 254mm×114.3mm |
Gross Weight | 43kg |
Packing Size | 570mm×190mm×345mm,1PC/CTN |
Specifications of Air Compressor
Maximum Output | 2.55CFM(72LPM) |
Air Filter | Included |
Noise | 70dB |
Auto Pressure Cut-off Switch | Included |
Airflow | 72lpm(12V),95lpm(24V) |
Voltage | 12V/24V |
Max Amperage Draw | ≥30A(12V),≥22A(24V) |
Optimal Operating Temperature | -40℃~+60℃ |
Max Continuous Cycle | -20% |
Max Pressure | 150PSI |
Overall dimensions of JN-SQ10000 and JN-SQ12000
Accessories
Using the air compressor to inflate the tire
Shandong JNDO Hoisting Equipment Co., Ltd. is a manufacturer specialized
in the research, development and production of high-quality made-in-China
winch/windlass,hoist,crane,jack,pallet truck,magnet lifter and
accessories etc.
Please feel free to contact us with any inquiries for products.
Our certificates
Parts of our products
We aim at your MAXIMUM satisfaction
Your SUCCESS is our BUSINESS!
1. Product, Package.
2. Sample order.
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get them.
5. When you get the goods and do some tests,please give us a feedback.
If you have any problems,contact us, and we will offer you the way to solve them.
Q1:How are your goods packed? |
A:Generally, we pack our goods in wooden box with plate , If you have legally registered patent,we can pack the goods in your branded boxes after getting your authorization letters. |
Q2:What is your terms of payment? |
A:T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. |
Q3:What is your terms of delivery? |
A: EXW, FOB, CFR, CIF. |
Q4:How about your delivery time? |
A:Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. |
Q5:What is your sample policy? |
A:We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost. |
Q6:Do you test all your goods before delivery? |
A:Yes, we have 100% test before delivery. |
Please contact me according to the information below