Product Details

Specifications

high quality CD1 3000kg wire rope electric hoist for single girder crane
Capacity: 0.5T-50T
Lifting speed: 8/0.8m
travel s

high quality CD1 3000kg wire rope electric hoist for single girder crane

Product Description

Electric wire rope hoist Brief description:

CD1,MD1 model wire rope electric hoist is a kind of light type lifting equipment. It could be installed on single

girder crane with hoist, overhead,gantry and jib crane. Modified could be used as a winch. So it is a commonly

used lifting equipment in factory, mine, port, warehouse, cargo yard, shop etc, is a nessesary equipment to

improve working efficiency and labor conditions.

The lifting speed of CD1 model electric hoist is common speed, it could satisfy common use requirements, MD1 model electric hoist operates two lifting speeds---ommon speed and slow speed. When working at slow speed, it could satisfy precise loading and unloading, sand box moulding, machine tool inspection and other precise working requirements. So the use MD1 electric hoist would be much wider then CD1 hoist.

It is equiped with compact structure, convenient adjustment, small volumn, light weight, heavy gravity, easy operation etc

Electric wire rope hoist Applications:

It can travel rotyation through the trolley hanging on the I-steel,and install on the single beam crane,jib crane and overhang crane to rise and fall the cargos.So it can be used in factories,mines,wharf,warehouse ,freight yards and shops and so on,which need lifting equipement for lifting heavy objects.Such as mining companies and railways,docks,warehouse .It is prohibited to manned.

Advantsges of Electric wire rope hoist:

1.Lightweight, small bulk and convenient operation.

2.It can be adapted to overhead rails as well as in conjunction with many types of electric or manual cranes

such as the single-girder crane, the double-grinder crane, the cantilever crane and the gantry crane

Motor

Hoist Motor is a taper type rotor motor with braking; it is of the best quality

motors, it has bigger torque, so it can be adapted to moving frequently, the

Maximum torque is 2.4-3 times than the rated torque.

Gear

Box

Hoist Gear Box has specially treated gears for high wear resistance. Each Geared

Shaft assembly is supported on ball or roller bearings, to ensure smooth,

low-friction operation.

Wire

Rope

Hoisting rope comply with the exporting standards. The leading rope taken by

the Drum does not slip sideways when slack. The factor of safety, on the

nominal breaking strength of the rope is six.

Rope

Drum

Grooved Drum, seamless pipe of adequate length to be wounded in one layer

and to provide proper support for the rope to minimize abrasive wear

is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric

apparatus

controlling

system

Model CD1 or MD1 is composed of the contactor box, controlling switch, cut-off

limiter. The working voltage of controlling switch is 380V, 36V or 24V

(safety voltage).

Rope

Guide

Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum

completely so that the rope may not uncoil even when the Hoist is in unloaded

condition. The rope guides of our company is thicken and dilated,

so that it is not easy to be damaged.

Hook

The hook block is tested to 150 % of full load before assembly. The rope

sheaves are fully guarded with protective steel casting. All sheaves rotate

on ball bearing. The pulley is thicken and dilated than domestic common

Safety Features of Electric wire rope hoist:

Fire stopper :Adjustment mechanical memory structure ,high sensitivity

Weight Limiting stopper:preventing hook clashing the top,senstive reaction.Safe and durable ,easy to install and debug

Overload limiter:Preset related data according working condition ,show accurate weight value clearly.Modular,low power design.

Product parameter

Parameter of Electric wire rope hoist:

Model	CD1/MD1-0.5	CD1/MD1-1	CD1/MD1-2	CD1/MD1-3	CD1/MD1-5	CD1/MD1-10
Capacity	0.5T	1T	2T	3T	5T	10T
Rope (Standard)	6M/9M/12M/18M/24M/30M
Lifting speed	8 (8/0.8)M/Min					7(7/0.7) M/Min
Pan speed	20/30 M/Min
Rope(Φ)	4.8MM	7.4MM	11MM	13MM	15MM	15MM
I Beam	16-28B	16-28B	20A-32C	20A-32C	25A-63C	28A-63C
I Beam(R)	1.5M	1.5-4M	2-4M	2-4M	2.5-5M	3.5-9M
Lifting Motor	0.8KW	1.5KW	3KW	4.5KW	7.5KW	13KW
Running Motor	0.2KW	0.2KW	0.4KW	0.4KW	0.8KW	0.8X2KW
Voltage	380V
Frequency	50HZ
Phase	3P
Workrate	25%