German rexroth  manufacturing process technology ,China's price

parameter :

WE6 type 6x series wet solenoid operated directional valve                NG 6 pressure up to 31.5 Mpa flowrate up to 80 L/min
	Model description
	Principle of operation
	WE type directional control valve is operated by the solenoid to control flow direction and on-off the valve is mainly comprised of valve body (1) one or two solenoids (2) control spool (3) and one or two reset springs(4) When cutting off electricity the control spool(3) is on center or original position by reset spring (4) cexcept for pulse valve The control spool(3) is operated by wet solenoid(2) To ensure for obtaining satisfied with operation, the pressure cavity of solenoid must be filled with oil. The force of solenoid(2) going through rod (5) is acting on control spool (3) it will push on required position while on static position. The oil freely flows from P to A, B, to T P to B or A to T When the solenoid (2) off the control spool(3) will be pushed on original position by reset spring(4) For selection of manual urgent operation (6) can control the spool (3) motion when the solenoid is off  4WE 6..6X/O…type (only limiting symbol A.C.D)  The type consists of two switching positions and two solenoids without positions directional control valve 4WE 6..6X/OF…(pulse valve, only limiting symbol A.C.D) It consists of two switching position two solenoide and one positioner directional control valve Two switching positions are respectively fixed so the solenoid needn't requiring for long time woking  Insert throttling valve (4WE 6..6X/…/B..) Because of especial working state when switching it may appear as exceeding function curve of allowance flow under this condition it needs to mount insert thnttling plug The plug is mounted on P port of directional control valve.
	Technical paramter
	Mounting position       Slective   The hightest ambient temperature   t °C   To 50   Weight   With one solenoid valve m kg   1.45   With two solenoid valve m kg   1.95 Max working pressure   Port A, B, P P MPa   31.5   Port  T P MPa   To 21(=);  to 16(-)   If working pressure exceeds allowance pressure for spool A and B of the valve port T must be as leakage port   Max flow   qv   L/min   To 80(=); To 60(~)    Flow area (switching position O )   Spool  Q A mm2   About rated area 6%   Spool  W A mm2   About rated area 3%   Hydraulic oil     1) apply to perbunan seal viton seal     2) for use only viton seal     Mineral oil  (HL,HLP) DIN51 524 1);   Quick biologic dissolve oil according to VDMA 24 568;   HETG (rape seed oil);   HEPG(polyglycol); HEES(synthetic ester)2);   Other oil as required   Oil temperature changing range °C    -30 to +80(with perbunan seal)   -20 to +80 (with viton seal)   Viscosity range mm2/s  2.8 to 500   Contaminant degree The high contaminant class of oil is the ninth class of NAS 1638 recommend to use the oil filter with minimal filter fineness β10≥75
	Electricity data
	Volt type     DC AC   Available volt U V 12, 24, 42, 60, 96, 110, 180, 205,220 42, 110, 120, 220, 50/60Hz   Allowed volt (allowance volt )   % ±10     Power requirement P W 30 -   Power keep P VA - 50   Power impetus P VA - 220   Work repeating     100% 100%   Time repeating press   on T ms 25 to 45 10 to 20   ISO 6403                                            off T ms 10 to 25 15 to 40   Switching frequency time/h To 15000 To 7200   Insulation degree according to DIN40050 IP65 IP65   Coil temperatare °C To +150 To+180   It is correlative stipulated electric wire must be grounded
	Characteristic curve (be measured when ν=41mm2 /s t=50°C)
	7 symbol “R”is on switching position A-B 8 symbol “G”and “T”is on center position P-T
	Switching function limit (be measured when ν=41mm2 /s t=50°C)
	Working limit for giving is useful for two direction flowing condition (as for P port flow to A of returning of B to T at the same time ) When single direction flow (if the port from P to A B is plugged )because of flow strenth in the valve allowance switching limit may fall cloun Working limit is measured when solenoid is on working temperature owing volt 10% and the reservoir without bearing pressure
	DC solenoid Exemplification:G24:24V  AC solenoid Exemplification:W230:230V,5Hz AC solenoid Exemplification:W230:230V,5Hz Curve Symbol Curve Symbol Curve Symbol 1 2 3 4 5 6 7 8 9 10 A, B V A, B F, P J G, H, T A/O, A/OF, L, U C, D, Y M E, R, C/O, C/OF D/O, D/OF, Q, W 11 12 13 14 15 16 17 18 A, B V A, B F, P G, T H A/O, A/OF, C/O, C/OF D/O, D/OF, E, J, L M, Q, R, U, W C, D, Y 19 20 21 22 23 24 25 26 27 28 A, B V A, B F, P G, T J, L, U A/O, A/OF, Q, W C, D, H, Y C/O, C/OF, D/O, D/OF M, R
	External dimensions: valve with DC solenoid cooperated with surface fine machining requirement
	1.1 Solenoid “a”(grey plug-in connector)  1.2 Solenoid “b” (black plug-in connector)  2. Manual urgent operation  3.Size of solenoid “N”with manual urgent operation 4.Plug-in connector according to DIN43650 5.Name plate  6.O-ring  7. For use one plug of solenoid valve  8. Take off plug-in connector for space request  9. Take off coil for space request  10. Fixed screw nut tightened torque M =4Nm 11.Mounting surface according to DIN24 340, A type  ISO 4401 and CETOP-RP 121 H  bed plate  G341/01(G1/4”)  G342/01(G3/8”)  G502/01(G1/2”) Fixed screw of the valve M5X50 GB70-85-10.9  Tightened torque MA=8.9Nm
	External dimensions: valve with AC solenoid cooperated with surface fine machining requirement
	1.1 Solenoid “a”(grey plug-in connector) 1.2 Solenoid “b” (black plug-in connector)  2. Manual urgent operation  3.Size of solenoid “N”with manual urgent operation  4.Plug-in connector according to DIN43650  5.Name plate  6.O-ring  7. For use one plug of solenoid valve  8. Take off plug-in connector for space request  9. Take off coil for space request  10. Fixed screw nut tightened torque M =4Nm 11.Mounting surface according to DIN24 340, A type  ISO 4401 and CETOP-RP 121 H bed plate  G341/01(G1/4”)  G342/01(G3/8”)  G502/01(G1/2”) Fixed screw of the valve M5X50 GB70-85-10.9  Tightened torque MA=8.9Nm
	Connection bed plate
	1.Connection surface of the valve  2.Plate tangent  3.Fixed screw of the valve   4. Fixed screw of the valve four pieces M5X50 GB70-85-10.9 torque 9N.m

Valve pictures:

Depends on customers' orders. All goods are packed with a plastic bag with an outer carton and a wooden pallet( fumigation).

Can be customized according to customer requirements

Could Raypoo offer OEM service?

Yes. Raypo is able to offer OEM with customers' brand name and trademark onto the product.

Do Raypoo products come with a warranty?

 Yes.Raypoo offer 1-year guarantee without abusive usage on all purchases which begins with the bill of lading.

The Company offers an engineering and manufacturing team capable of providing advanced technology in the design and production of unique fluid power components and electronic controls.

The Company's  involvement focuses its expertise on markets in which customers demand top quality, prompt delivery, high performance and responsive aftermarket support.

The Company's products include hydraulic pumps, hydraulic motors, hydraulic valve ,valves controls manifolds, ,hydraulic cylinders, Industries that use these products include primary metals, machine tool, automobile, petroleum, construction equipment, chemical, plastic, glass, lumber, rubber and food.

The Company strives to serve those markets requiring high technology and expertise where reliability, top performance and longer service life are needed.

The products are sold as individual components or integrated into high performanceapplications. 

Plant and equipment Photos :