Specifications

carbide saw tips
OEM carbide tips,ISO9001
YG6,YG11,YG15 or according to your points
good feedback cemented carbide

yg6 carbide saw tips

Tungsten carbide insert have a thin metal blade or disk with a sharp, usually toothed edge. Tungsten Carbide tips is used for cutting wood, metal, or other hard materials. They can be hand-operated or power-driven. Our carbide tips have used in surface processing of cast irons, colored metal and alloys, as well as nonmetal materials for hard metal, carbide rough turn, rough planning, and precision milling.

 

Specification

We supply tungsten carbide wear part, tungsten carbide blanks, tungsten carbide rod, tungsten carbide plate, tungsten carbide tips, tungsten carbide drill bits, tungsten carbide saw tips, tungsten carbide tools, tungsten carbide insert, tungsten carbide blade, tungsten carbide dies, tungsten carbide products.

Crade	Density	TRS	Hardness	USE
	(g/cm2)	(N/mm2)	(HRA)
YG8C	14.7	2200	88	Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations.
YG11	14.3	2100	88	Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations.
YG11C	14.35	2200	87.6	Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations.
YG10C	14.45	2450	87.6	Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations.
YG15	14.0	1500	86.5	Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations.

 

 

Note: We can manufacure the non-standard as your samples or drawings.